Trendnet TVIP512P User Manual

TV-IP512P ProView PoE Internet Camera 

 

37 

The Recording Setup menu is used to determine when and how digital video recordings are 
handled. Recordings can be saved to an SD memory card (requires the insertion of an SD card 
into the camera) or to a shared folder on a secure server. The recording can be scheduled or event 
based using motion detection as the trigger. One option allows resolution of recordings to be 
adjusted down to use less hard disk space. Recording can be stopped when the hard disk is full or 
choose the option to overwrite the disk to replace old recordings.  

Tick this checkbox to enable the recording feature. 
There are two options available for recording, SD Card 
or Samba network drive. 

Click a radio button to specify where the recording 
should be saved. The available options are SD Card or 
Samba network drive. 

This option specifies that the recording will be saved to 
the SD Card in the SD Slot on the side of the camera. 

This option specifies that the recording will be saved to 
a Samba drive on your network.  

Use the drop-down menu to specify whether a user 
name and password is required to access the Samba 
drive. If no user name or password is required to 
access the Samba drive, choose Anonymous from the 
drop-down menu. If a user name and password is 
required to access the Samba drive, choose the 
Account option from the drop-down menu and 
configure the parameters as described below: 

ƒ 

User Name- Type the user name required to 
access the Samba drive. 

ƒ 

Password- Type the password required to access 
the Samba drive. 

ƒ 

Password Confirm- Type the password required 
to access the Samba drive for verification. 

ƒ 

Server- Type the name or IP address of the server 
your Samba drive is on. 

ƒ 

Shared Folder- Enter the path that points to the 
shared server. 

 

Click the Test button to check that the TV-IP512P can connect to the Samba drive.