TROY Group Font Card Kit 4515 User Manual

S 

Font Card Kit User’s Guide -- Document #50-70407-003  Rev. A

 

A-1

 

 

 

1. Remove the plastic panel on the right side of the printer by sliding it 

toward the back of the printer (Figure 1). 

2. Open the metal access door (Figure 2). 
3. Remove the TROY Font Card from the protective anti-static bag. 
4. Carefully insert the TROY Font Card into the first USB slot at the 

bottom of the electronics cage (Figure 3, 4).  The TROY Font Card 
connector and USB slot are keyed, allowing the TROY Font Card to 
be plugged into the USB slot in one orientation only.  Do not force the 
Font Card into the USB slot.  Ensure the TROY Font Card is fully 
inserted into the USB slot.                                                                                                  Figure 1 

5. Close the metal access door.  Be sure it snaps into place and is fully closed. 
6. Replace the plastic panel by sliding it onto the side of the printer until it snaps into place. 
7. Reconnect the printer power cord, and then switch the printer power ON. 
8. Refer to the TROY Quick-Start Guide for instructions on installing the TROY support files on your computer. 

Get user manuals: 

See SafeManuals.com