Omnitron iConverter 100FF 8630-1-Z User Manual
Product codes
8630-1-Z
iConverter
iConverter
®
100BASE-FX single-mode to multimode fiber converter
■
Supports multimode, single-mode and single-fiber
■
with SC and ST connectors
Supports distances of 120km or longer*
■
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
LED displays for immediate visual status of each port
■
Conforms to IEEE 802.3 and 100BASE-FX
■
specifications
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
100FF
100BASE-FX Single-Mode to Multimode Managed Fiber Converter
The iConverter 100FF managed media converter provides
multimode to single-mode and dual fiber to single fiber
conversion, and is a cost-effective solution for extending fiber
network distances.
iConverter 100FF models are available with multimode, single-
iConverter 100FF models are available with multimode, single-
mode and single-fiber options. The single-mode fiber port
supports ST or SC connectors and distances up to 120km.
The multimode fiber port supports ST or SC connectors and
distances up to 5km.
The 100FF features user-selectable Link Propagate and
Remote Fault Detection modes to facilitate quick fault
detection, isolation and reporting.
The iConverter 100FF is available as a compact, unmanaged
standalone unit, or as a chassis plug-in module that can be
managed with a management module installed in the chassis.
The hot-swappable plug-in module can be mounted in a
high-density 19 or 5-Module chassis with any combination of
redundant AC and DC power supplies. It can also be mounted
in a 2-Module AC or DC powered chassis, or in a 1-Module
chassis with AC or DC power input.
The standalone 100FF can be wall-mounted and is DC
powered. It can be ordered with an external AC/DC power
adapter, or it can be directly powered using a 2-pin terminal
connector.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features
*Contact Omnitron