Fujitsu FPCCC47 User Manual
3
Installing the Tablet PC
Figure 2. Bump case - Rear
Prior to installing the Tablet PC into the bump
case, remove the pen. Once the system is
installed, you will not be able to remove the
pen. Store the pen in the pen holder. (Figure 1)
case, remove the pen. Once the system is
installed, you will not be able to remove the
pen. Store the pen in the pen holder. (Figure 1)
This bump case is designed to accommodate a
system with a standard main battery or an
optional high-capacity battery installed. The
high-capacity battery is wider than the main
battery, so a battery strap and a foam bumper
(see Figures 3 and 4) are provided to secure
the system when a main battery is installed.
system with a standard main battery or an
optional high-capacity battery installed. The
high-capacity battery is wider than the main
battery, so a battery strap and a foam bumper
(see Figures 3 and 4) are provided to secure
the system when a main battery is installed.
Side Flap
Velcro
Strips
Strips
Hand straps
D-Rings
(4 places)
(4 places)
Battery Release Latch access
WLAN switch access
FPC58-1044-01 Bump Case.fm Page 3 Monday, December 8, 2003 1:28 PM