JVC Model SR-TS1U User Manual
EN
41
Super VHS ET
Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
to record with S-VHS picture quality on VHS cassettes.
SELECT S-VHS ET SET
MODE
1
Press S-VHS ET. The button lights up.
● The "S-VHS" indicator lights on the front display
panel.
● To disengage the S-VHS ET mode, press S-VHS ET.
The button‘s light goes off.
JOG
SHATTLE
S-VHS ET
NOTES:
● You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
...while timer-recording (incl. Instant Timer Recording
墌
pg.
51 and Automatic Satellite Program Recording
墌
pg. 52) is
in progress.
...while Video Calibration (
墌
pg. 36) is in progress.
...when the VCR's power is off.
● S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS
ET on a VCR equipped with S-VHS ET.
ET on a VCR equipped with S-VHS ET.
NOTES:
● To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS
tape is recommended.
● You can play back S-VHS ET recordings not only on this VCR but also on another VHS VCR equipped with S-VHS ET.
* It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.
● S-VHS ET recordings can also be played back on an S-VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAY-
BACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.
● Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.
● With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do
test record beforehand to make sure whether better results can be obtained.
● High Grade tapes are recommended for superior results.
● Make sure that "VIDEO CALIBRATION" is set to "ON" at the Function screen (
墌
pg. 36).
● During S-VHS ET playback noise may appear depending on tape quality.
● Noise may appear during still frame-by-frame and slow-motion playback.
● If the playback picture becomes blurred or interrupted, use a cleaning cassette.