Smeg PTS723-3 User Manual

 

 

 

Fit the insulating gasket provided carefully around the outside edge of the hole made in 
the top as shown below, pressing it down with your hands so that its entire surface fits 
snugly.  Follow the dimensions shown, depending on the model of hob to be installed, 
bearing in mind that on both models the long front edge must be flush with the hole. Fix 
the hob to the structure using the brackets A provided. Carefully trim off the excess 
edge of the gasket B. The dimensions in the drawing below refer to the hole on the 
inside edge of the gasket. 

    

 

 

See right for the precise holes to be used when 
securing the hob to the top correctly using the 
brackets.