Smeg PTS723-3 User Manual

 

 

 

Use a pressure regulator and make the connection to the gas cylinder in accordance 
with the relevant regulations. Make sure that the gas supply pressure is as stated in 
the table in point "5.2 Adjusting for bottled gas". 

 

 

 

The appliance may only be installed in a permanently ventilated room as specified by 
the relevant regulations. The air flow into the room where the appliance is installed 
must be sufficient for proper gas combustion and room ventilation. The air intakes, 
protected by gratings, must be of suitable size (see relevant regulations) and located 
so that they cannot be even partially obstructed. 
The kitchen must be kept properly ventilated to disperse the heat and humidity 
produced by cooking processes: in particular, a window should be opened or the 
speed of any fans increased after prolonged use. 

 

 

 

Combustion gases must be discharged by means of hoods connected to a flue with 
reliable natural draught, or a fan extraction system. An effective extraction system 
requires careful design by an authorised specialist, and must comply with the 
regulation distances and positions. After installation, the engineer must issue a 
certificate of compliance.