Maxtor SLD240 User Manual

MENU BACKGND:

There are 3 levels of background color transparency you can choose from : level 1 is totally

transparent, level 3 is opaque, and level 2 is between level 1 and 3. The background color is

used in the setup menu and search function.

BUZZER:

This option determines the embedded buzzer sounding a tone to signal the following

situations. A tone lasts about two seconds long.

ON: Enables buzzer.

OFF: Disables buzzer.

Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDD

PASSWORD:

This option allows you to set a password to prevent any unauthorized re-formatting of the

hard disk drives or use by a network viewer. The standard password is “9999”.

OLD PASSWORD: Enter the pre-set password (or the standard password if this is the

initial setting) to access the password setting system.

NEW PASSWORD: Enter a 4-digit-number password of your choosing which will replace

the pre-set password (or the standard password “9999”).

Important: Do not forget the password you create as the process can not be

reversed without the proper password. Write down your password

and save it in a secure location, if necessary.

SETUP PWD:

When this option is on, the user must clear the password check before entering the setup

menu.

ON: Enables it.

OFF: Disables it.