Maxtor SLD240 User Manual

44 

6. 

  

 

6. Secure the driver in the rack using two 

mounting screws in both the 
side-mounting holes. Please don’t 
tighten the screws too much, otherwise 
that may damage the driver. 

7. 

  

8. 

 

7.  Screw the rack into the device, 

screwing in all the four screws. 
 

8.  Attach the interface connector and the 

power connector to the drive. Please 
note the red lining of the IDE cable 
must be facing the 4-pin power 
connector. 

10. 

  

  

 

 
Place the mobile rack back onto the device and screw it in. 

 
 
6.2 Mobile Rack 
 

 

1. Make sure that the key is unlocked. 

 

2. Pull the active-handle outward to remove the carrier body away from 

the mobile rack.