Philips Pocket projector PPX1230 PPX1230/EU User Manual
Product codes
PPX1230/EU
8
Philips · PPX1230
EN
Connecting to mobile multimedia devices
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Component Mobile Device P2
Signal output, multimedia devices
Connecting to a Computer
(VGA)
(VGA)
Use the VGA audio cable (accessory) to connect the
projector to a computer, laptop or some PDAs. The
projector supports the following resolutions: VGA/
SVGA/XGA . For best results, set the computer's reso-
lution to SVGA (800x600).
projector to a computer, laptop or some PDAs. The
projector supports the following resolutions: VGA/
SVGA/XGA . For best results, set the computer's reso-
lution to SVGA (800x600).
Laptop VGA P2
1 Connect the VGA audio cable to the VGA / YPbPr
socket of the projector.
2 Connect the VGA plug to the computer's VGA
socket and the audio plug to the computer's audio
output.
output.
3 Adjust the computer's resolution to the correct set-
ting and switch the VGA signal to an external moni-
tor.
tor.
4 The following resolutions are supported:
Notice
Switching to the multimedia device sig-
nal output
nal output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
to find out how to switch the signal output to
this jack.
Resolution
Image
refresh rate
refresh rate
VGA
640 x 480
60 Hz
SVGA
800 x 600
60 Hz
XGA
1024 x 768
60 Hz