Fujitsu RX100 S7 VFY:R1007SXG10IN Data Sheet

Product codes
VFY:R1007SXG10IN
Page of 8
Data Sheet
 Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server 
Page 3 / 8
http://ts.fujitsu.com/Primergy
Technical details
PRIMERGY RX100 S7
Hard disk architecture
3.5” SAS/SATA
3.5” SAS/SATA
2.5” SAS/SATA
2.5” SAS/SATA
Power supply
Standard
Hotplug
Standard
Hotplug
Mainboard
Mainboard type
D 3034
Chipset
Intel® C202
Processor quantity and type
1 x Intel® Core™ i3 processor / Intel® Pentium® processor / Intel® Xeon® processor E3 series
Processor
Intel® Core™ i3-2100 processor
 (2C/4T, 3.10 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Core™ i3-2120 processor
 (2C/4T, 3.30 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Pentium® processor G620
 (2C/2T, 2.60 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Xeon® processor E3-1220
 (4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.40 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1220L
 (2C/4T, 2.20 GHz, TLC: 3 MB, Turbo: 3.40 GHz, 1333 MHz, 20 W)
Intel® Xeon® processor E3-1230
 (4C/8T, 3.20 GHz, TLC: 8 MB, Turbo: 3.60 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1240
 (4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: 3.70 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1260L
 (4C/8T, 2.40 GHz, TLC: 8 MB, Turbo: 3.30 GHz, 1333 MHz, 45 W)
Intel® Xeon® processor E3-1270
 (4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.80 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1280
 (4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.90 GHz, 1333 MHz, 95 W)
Memory slots
4 (2 banks with 2 DIMMs each)
Memory slot type
DIMM (DDR3) UDIMM
Memory capacity (min. - max.)
2 GB - 32 GB
Memory protection
ECC
Memory notes
Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity 
per channel has to be the same.
Memory modules
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB ports
7  x (2x front, 4x back, 1x internal for UFM)
Graphics (15-pin)
1  x VGA (15-pin)
Serial connection
1  x serial RS-232-C,  usable for iRMC or system or shared
LAN / Ethernet (RJ-45)
2 x Gbit/s Ethernet
Service LAN (RJ45)
1 x dedicated Service LAN port for iRMC S3  (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID Controller
Integrated RAID 0/1 or RAID 5/6 controller (option)
See under Components RAID controller
SATA Controller
Intel® C202, 1 port used for accessible drive 
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;