Supermicro Xeon Motherboard X7DVA-8 X7DVA-8 User Manual

This manual is written for system integrators, PC technicians and 

knowledgeable PC users.  It provides information for the installation and use of 

the 

 X7DVA-8/X7DVA-E motherboard.  The 

 X7DVA-8/E supports 

dual Intel

 

Xeon dual core processors with a front side bus speed of 667 MHz/1.066 

GHz/1.333 GHz. With dual 64-bit Xeon dual core processors built-in, the X7DVA-8/E 

offers substantial functionality enhancements to the motherboards based on Intel 

dual core NetBurst microarchitecture while remaining compatible with the IA-32 

software.  The features include Intel Hyper-Threading Technology, Virtualization 

Technology, Hyper Pipelined Technology, Execution Trace Cache, Thermal Moni-

tor 1/2 (TM1/TM2),  Enhanced Intel SpeedStep technology,  Advanced Dynamic 

Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3 (SSE3) and  

Extended Memory 64 Technology (EM64T). These features allow the motherboard 

to operate at much higher speeds with better power management in much safer 

thermal environments than the traditional motherboards.  The X7DVA-8/E is ideal for 

high performance dual processor (DP) enterprise server environments. Please refer 

to the motherboard specifi cations pages on our web site (http://www.supermicro.

com/Product_page/product-m.htm) for updates on supported processors.  This 

product is intended to be professionally installed.  

Chapter 1 describes the features, specifi cations and performance of the mainboard 

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions.  Read this chapter when 

installing the processor,  memory modules and other hardware components into 

the system. If you encounter any problems, see Chapter 3, which describes 

troubleshooting procedures for the video, the memory and the system setup stored 

in CMOS. 

Chapter 4 includes an introduction to BIOS and provides detailed information on 

running the CMOS Setup utility.

Appendix A and Appendix B provide BIOS POST Messages and POST Codes. 

Appendix C, Appendix D lists  Other Software Driver and Program Installation 

Instructions.

Special attention should be given to the following symbols for proper installation and 
to prevent damage done to the components or injury to yourself: 

Danger/Caution: Instructions to be strictly followed to prevent  

 

catastrophic system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation 

or to prevent damage to the components.

Note:  Additional Information given to differentiate various models or to ensure cor-

rect system setup.

iii

Preface