Supermicro SuperServer 6014P-32 Beige SYS-6014P-32 User Manual

This manual is written for professional system integrators and PC technicians.  It 

provides information for the installation and use of the SuperServer 6014P-32 and 

6014P-32R.  Installation and maintainance should be performed by experienced 

technicians only.  

The SuperServer 6014P-32/6014P-32R is a high-end 1U rackmount server based 

on the SC816A-700/SC816A-R700 1U rackmount server chassis and the X6DHP-

3G2 serverboard, which supports single or dual Intel® Xeon™ processors of up 

to 3.60 GHz at a Front Side (system) Bus speed of 800 MHz and up to 16 GB of 

DDR2-400 SDRAM memory.

The fi rst chapter provides a checklist of the main components included with 

the server system and describes the main features of the SUPER X6DHP-3G2 

serverboard and the SC816A-700/SC816A-R700 chassis, which make up the 

SuperServer 6014P-32/6014P-32R.

This chapter describes the steps necessary to install the SuperServer 6014P-

32/6014P-32R into a rack and check out the server confi guration prior to powering 

up the system.  If your server was ordered without processor and memory com-

ponents, this chapter will refer you to the appropriate sections of the manual for 

their installation.  

Refer here for details on the system interface, which includes the functions and 

information provided by the control panel on the chassis as well as other LEDs 

located throughout the system.   

 

iii

Preface