Fujitsu PRIMERGY TX150 S4 VFY:TX150S4-118GB Leaflet

Product codes
VFY:TX150S4-118GB
Page of 2
Data sheet 
⏐ Issue: May 17, 2006⏐ PRIMERGY TX150 S4 
Page 2 / 2 
 
 
 
Type 
Mono Socket Tower Server  
System board  
D2239 
  Chip set 
Intel® E7230   
  Processors 
Intel® Celeron D/Pentium® 4/Pentium® D  
  Type /  
  Frequencies (GHz) 
346 (3.06) / 631 (3.0), 651 (3.40) GHz / 
820 (2.8), 930 (3.0), 940 (3.2) GHz 
  Front-Side-Bus  
533 MHz, 800 MHz, 800 MHz 
  Second-Level-Cache  
256 KB, 2 MB, 2x1 MB, 2x2 MB ECC   
Memory 
512 Mbyte - 8 Gbyte ECC PC2-4200 DDR2 SDRAM; 4 slots; 
(512 Mbyte, 1 Gbyte, 2 Gbyte) 
Mix and match possible; with dual channel operation better 
performance (2 capacity equal modules necessary). Single channel 
(1 module) configuration possible. 
Flash-EPROM 
Local BIOS update via bootable USB device or opt. floppy disk;  
Remote BIOS update via LAN (Global Flash tool) and via optional 
RemoteView Service Board (RSB S2 LP).  
Interfaces  
  Serial 
1 x serial RS-232-C (9-pin) or BMC 
1 x serial RS-232-C (9-pin) 
  Centronics (parallel) 
1 x 25-pin, EPP/ECP compatible 
  Keyboard, Mouse 
2 x PS/2  
  USB 
1 x front, 2 x back  
  Graphics 
1 x VGA (15-pin) 
  LAN 
1 x RJ45 
Onboard controller ** 
  IDE 
1 x ATA100 (1 channel for 2 drives DVD / 
DVD-RW) 
  SCSI variant 
  (LSI 53C1020A) 
1-channel Ultra320 SCSI for internal HDD´s 
and internal backup devices with RAID 1 
(Integrated Mirroring Enhanced also for odd 
numbered HD´s for Windows and Linux) 
  Intel® ICH7R  
  Chipset 
RAID 0, 1, 10 (LSI) 
(for up to 4 x hot-plug SATA HDD) 
  LAN (Broadcom  
  BCM5721) 
Ethernet 10/100/1000 Mbit/s 
(PCE-Boot via LAN from PXE server) 
  Graphics 
ATI Rage XL 
  Server management 
Baseboard Management Controller (BMC), 
IPMI 1.5 compatible 
PCI Controller ** 
RAID Controller 
ZCR (Zero Channel Controller) or 
2 channel RAID 
LSI MegaRAID 
SATA 8308ELP 
SATA RAID5 controller 
Hard disk drives 
36, 73, 146, 300 Gbyte SCSI (hot-plug) or 
80,160, 250, 500 Gbyte SATA (hot-plug) 
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 
I/O Slots:  
  2 x PCI-X 64-bit / 66 MHz, long; (3,3 V);  
  3 x PCI 32-bit / 33MHz, (2 x short , 1 x long (5V); 
  2 x PCI-Express, 1 x PCIe x1; 1 x PCIe x8 (x4 wired)       
Drive bays  
  for hard disks  
  SCSI variant 
 
 
  SATA II variant 
  
4 x 3.5/1-inch, for hot-plug SCSI (in slide-in 
chassis) Optional: 3 x 3.5/1-inch hard disk 
extension unit, occupies 2x 5.25/1.6-inch 
bays for accessible drives  
4 x 3.5/1-inch for hot-plug SATA  
(in slide-in chassis)  
  for accessible  
  drives 
3x 5.25/1.6-inch, one bay is occupied by 
DVD or DVD-RW 
  for floppy disk drive 
1x 3.5/1-inch, occupied by FDD (optional) 
 
All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 
© Fujitsu Siemens Computers, 05/2006 
  Published by  
 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/
Company stamp 
 
 
 
 
Electrical values  
 1x standard or 2x optional redundant hot-plug power supplies 
  Output power 
400 W   /   1 + 1 x 400 W  each 
  Rated voltage range 
100 - 240 V  
  Rated frequency 
50-60 Hz  
  Max. rated current  
100 V - 240 V / 6 A – 3 A 
  AC output 
 - / -  
  Rated current in 
  basic configuration 
100 V - 240 V / 1.9 - 0.8 A  
  Active power 
274 W   
  Apparent power 
300 VA   
  Heat emission 
983 kJ/h (932 btu/h) 
Temperature/Noise/Dimension/Weight 
  Ambient temperature 
10°C - 35°C (DIN EN 60721) 
 Declared noise in 
 according with ISO 9296 
idle / operating 
  Sound pressure LpAm
 
33 db(A) / 35 db(A) 
  Sound power LWAd 
5,1 B / 5,4 B (1 BEL = 10 db) 
  Dimension  
  of floor-stand (HxWxD) 
444 * 205 * 605 mm,  
incl. all plastics  
  Weight 
approximately 28 kg 
Compliance with Norm and Standards 
 Product safety 
  Global  
IEC 60950 
  Europe  
EN 60950 
  USA 
UL 60950 3rd. Ed. 
  Canada 
CAN/CSA-C22.2 No. 60950 3rd. Ed. 
 Electro magnetic compatibility 
  Europe 
EN 55 022 class A, EN 55024,  
EN61000-3-2 / -3 
  USA / Canada 
FCC class A 
 Declaration of conformity 
  Europe (CE)  
89/336/EEC;  
73/23 EEC  
  North America  
FCC class A  
Approvals  
 Product safety  
  Global 
CB 
  Europe 
CE 
  USA / Canada 
CSAUS / CSAC 
There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 
Supported operating systems 
  Microsoft: Windows 2003 Enterprise; Standard; Web Edition 
  Microsoft: Windows 2003  Enterprise; Standard x64 Edition 
  Microsoft: Windows SBS* 2003 Standard 
  Microsoft: Windows 2000 Advanced Server; Server 
  Novell: Netware 6.5 (only for SCSI variant)  
  SCO: Open Server 5.0.7; Unixware 7.1.4  (only SCSI)  
  SUSE: x86 SLES 9; SUSE EM64T SLES 9 
  Red Hat: x86 EL 3.0 / EL 4.0  
  Red Hat: EM64T EL 4.0 
 * No application support 
** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 
  Standard 
PRIMERGY ServerView Suite;  
PDA, ASR&R  
  Optional 
RemoteView, RemoteView  
Service Board 2 (RSB 2)