3M ChassisTouch 17" LCD Enclosure Monitor 11-4945-225-00-U Leaflet

MicroTouch and ClearTek are trademarks of 3M.                                                          Printed in USA     © 3M 2007     FPDCM-0307

Touch Monitor

11-4945-225-00  (RoHS)(USB)(Europe only)
11-4945-227-00 (RoHS)(Serial)

TFT, Active Matrix

16.2 Million

.264mm

300 cd/m

2

Typical

240 cd/m

2

500:1 Typical

13 milliseconds

Horizontal: +/- 75 degrees typical (150 total)
Vertical: +75/-60 degrees typical (135 total)

OSD

Brightness, Contrast, H/V Position,
Phase, Auto-adjust, Sharpness, OSD
control, Frequency, Utility

1280 x 1024

0  to +50 degrees C, 
90% relative humidity, non-condensing

-25 to +60 degrees C

405.7 x 335.1 x 49 mm
15.98 x 13.18 x 1.93 inches

337.9 x 270.3 mm
13.3 x 10.6 inches

15 Pin D-Sub

12V DC Power Supply

DPMS, VESA Compliant

30 Watts Normal

35,000 hrs. Typical

4.6kg/10.1 lbs

FCC B, CE, UL/cUL

2 sets of brackets, VESA 100 mm

3 years FPD
5 years touch sensor and components

™

™

Rear view with 

VESA-mount arm

ChassisTouch Monitor

with optional flush bezel

Optional bezel

11-4942-505-00 (USB)(Americas only)

TFT, Active Matrix

16.7 Million

.264mm

250 cd/m

2

Typical

215 cd/m2

300:1 Typical

25 milliseconds

Horizontal: +/- 75 degrees Typical
Vertical: +65/-60 degrees Typical

OSD

Brightness, Contrast, H/V Position,
Phase, Auto-adjust, Sharpness, OSD
control, Frequency, Utility

1280 x 1024

0  to +40 degrees C, 90% Relative
Humidity, non-condensing

-25 to +60 degrees C

405.7 x 335.1 x 49 mm
15.98 x 13.18 x 1.93 inches

337.9 x 270.3 mm
13.3 x 10.6 inches

15 Pin D-Sub

12V DC Power Supply

DPMS, VESA Compliant

30 Watts Normal

35,000 hrs. Typical

4.6kg/10.1 lbs

FCC B, CE, UL/cUL

2 sets of brackets, VESA 100 mm

3 years FPD
5 years touch sensor and components

300 Griffin Brook Park Drive
Methuen, MA 01844
U.S.A.
1-866-407-6666
www.3M.com/touch

ROHS DIRECTIVE COMPLIANT: In accordance with European Directive 2002/95/EC, "RoHS Directive compliant" means that the product or part
does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless
the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information 
represents 3M’s knowledge and belief based on information provided by third party suppliers to 3M. (9/06)

NOTICE: Given the variety of factors that can affect the use and performance of a 3M Touch Systems Product (the “Product”), including that
solid state equipment has operation characteristics different from electro mechanical equipment, some of which factors are uniquely within
User’s knowledge and control, it is essential that User evaluate the 3M Touch Systems Product and software to determine whether it is suit-
able for User’s particular purpose and suitable for User's method of application. 3M Touch Systems’ statements, engineering/technical infor-
mation, and recommendations are provided for User’s convenience, but their accuracy or completeness is not warranted. 3M Touch Systems
products and software are not specifically designed for use in medical devices as defined by United States federal law. 3M Touch Systems
products and software should not be used in such applications without 3M Touch Systems’ express written consent. User should contact its
sales representative if User’s opportunity involves a medical device application.

IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems’ Products and soft-
ware are warranted to meet their  published specifications from the date of shipment and for the period stated in the specification. 3M Touch
Systems makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability
or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products and software are fit for
User's particular purpose and suitable for its method of production, including intellectual property liability for User's application. If the
Product, software or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch Systems’ sole obligation and
User's and Purchaser’s exclusive remedy, will be, at 3M Touch Systems’ option, to repair or replace that Product quantity or software media-
tor to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Systems’ warranty for any Product, software or soft-
ware media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies
by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the
Products or software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential 
(including downtime, loss of profits or goodwill) regardless of the legal theory asserted. (7/02)