Lapara LA-ON-1K-LCD User Manual
www.laparaups.com
ACCESORIES
Automatic Transfer Switch (LA-ATS)
This ATS (Automatic Transfer Switch) is designed with two independent power inlets to supply power to the load from a
primary power source. Should primary power source fail, the secondary will automatically back up the connected
equipment without any interruption. After switching to a secondary power source, the ATS can also switch power back to
the primary input when power to the primary input is restored.
primary power source. Should primary power source fail, the secondary will automatically back up the connected
equipment without any interruption. After switching to a secondary power source, the ATS can also switch power back to
the primary input when power to the primary input is restored.
•
Max. input current: 16A.
•
Redundant protection powered by two separate independent power
sources.
sources.
•
It provides seamless power switch for connected equipment.
•
Source preference selector on front panel.
•
Highly reliable 19” rack design (1U) to fit into different working
environments.
environments.
•
USB & RS-232 communication ports.
ATS – AUTOMATIC TRANSFER SWITCH
MODEL
LA-ATS
INPUT
Input voltage
Input voltage
208/220/230/240VAC
Acceptable input voltage
180-258 VAC
Input frequency
50-60 Hz
Input nominal current
16A
OUTPUT
Output voltage
Output voltage
220/230/240 VAC
Max. output current
10A for IEC-C13 outlets
16A for IEC-C19 outlets
16A for IEC-C19 outlets
CONECTIONS
Input
Input
2 x IEC (C20)
Output
8 x IEC (C13)
1 x IEC (C19)
1 x IEC (C19)
PHYSICAL
Dimensions D x W x H (mm)
Dimensions D x W x H (mm)
330 x 483 x 44
Net weight (Kg)
5
Net weight (Kg) Incl. accessories
8
ENVIRONMENT
Operating temperature & humidity
Operating temperature & humidity
20-95 % RH @ -5 - +45°C (non-condensing)
- 23 -