StarTech.com Component Video Extender over Cat 5 CPNTUTPEXT Leaflet
Product codes
CPNTUTPEXT
Introduction
Thank you for purchasing a StarTech.com Component Video
over Cat5 Extender. This product offers a cost effective way
to connect Component Video devices using Cat5 cable,
making it ideal for classrooms, projectors, tradeshows, and
retail displays using a component video signal.
over Cat5 Extender. This product offers a cost effective way
to connect Component Video devices using Cat5 cable,
making it ideal for classrooms, projectors, tradeshows, and
retail displays using a component video signal.
Features
• Extend Component Video signals up to 200 meters
using Cat5 cable
• No software or power adapter required
• Works with Shielded Twisted Pair (STP) and
Untwisted Pair (UTP cable)
• Easy wall mount installation (optional)
Before You Begin
System Requirements
• A Component Video Source
• Input and Output Component Video cables
• A display with an available Component Video input
Contents
2 x Component Video Extenders (local and remote ends)
1 x 20cm Component Video cable
1 x Installation/Mounting Kit
1 x User Manual
Basic Setup
1. Connect the Component Video cable to the outputs on
the back of the video source.
2. Connect the opposite end of the Component Video cable
used in Step 1 to CPNTUTPEXT local unit (marked
Y, Pb, Pr respectively).
Y, Pb, Pr respectively).
3. Connect the Cat5 cable to the RJ45 port on
CPNTUTPEXT local unit (marked RJ-45 Balanced
Component Video).
Component Video).
4. Connect the opposite end of the Cat5 cable to the RJ45
port on the CPNTUTPEXT remote unit.
5. Connect a second Component Video cable to the
designated ports on the output SVIDUTPEXT unit
(marked Y, Pb, Pr).
6. Connect the remaining end of the Component Video
cable to the monitor/display. For further instructions on
how to locate the Component Video ports on your
how to locate the Component Video ports on your
display, please refer to the documentation that
accompanied the display at the time of purchase.
accompanied the display at the time of purchase.
Specifications
Pin out definition
General Specifications
Accessories
ZENCPNT1
Cable ZEN 3.3 ft (1m) Component Video Cable
Cable ZEN 3.3 ft (1m) Component Video Cable
ZENCPNT2
Cable ZEN 6.6 ft (2m) Component Video Cable
Cable ZEN 6.6 ft (2m) Component Video Cable
M45PATCH75BL
75 ft Blue Molded Cat 5e (350 MHz) UTP Patch Cable
75 ft Blue Molded Cat 5e (350 MHz) UTP Patch Cable
M45PATCH100B
100 ft Blue Molded Cat 5e (350 MHz) UTP Patch Cable
100 ft Blue Molded Cat 5e (350 MHz) UTP Patch Cable
Component Video (YPbPr) Cat5 Extender
CPNTUTPEXT
CPNTUTPEXT
Revised: 06 July 2006 (A)
Support, Warranty Information, and Regulatory Compliance Statement
If you ever need help with your product, visit www.startech.com/support and access our comprehensive
selection of online tools, documentation, and downloads. This product is backed by a one-year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the peri-
ods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor
costs only. StarTech.com does not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear. Limitation of Liability: In no event shall the liability of
StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any
damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of
profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions contained in this statement may
not apply to you.
FCC Compliance Statement: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you ever need help with your product, visit www.startech.com/support and access our comprehensive
selection of online tools, documentation, and downloads. This product is backed by a one-year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the peri-
ods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor
costs only. StarTech.com does not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear. Limitation of Liability: In no event shall the liability of
StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any
damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of
profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions contained in this statement may
not apply to you.
FCC Compliance Statement: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Pin
Color
Function
1
W-O
Pr +
2
O
Pr -
3
W-G
Pb +
4
BL
Y -
5
W-BL
Y +
6
G
Pb -
7
W-BR
X
8
BR
X
Jack Position
Pair 1
Pair 4
Pair 2
Pair 3
1
2
3
4
5
6
7
8
Component Video
Source
= Component Video
= Cat5 Cable
Up to 200m
Certifications (Regulatory etc.) FCC, CE, WEEE, RoHS
Connectors
Input: 1 x RJ45
1 x Component female
Output: 1 x RJ45
1 x Component female
Dimensions (LxWxH)
110 x 77 x 24mm
Weight
460g (1.014 lb)
Maximum Resolution
480i/480p/720p/1080i
Bandwidth
DC to 8MHz