Buffalo BS-POE-G2124M-EU User Manual
Features and Benefits
• Layer 2
• VLAN
• SNMP support
• PoE gives small, medium, and large businesses room
• VLAN
• SNMP support
• PoE gives small, medium, and large businesses room
to grow with easy and flexible placement:
- Devices attached to switch no longer need
to be within reach of a power outlet
- One LAN cable for both data and power
- No a/c adapter for switch itself
• Best-suited Gigabit PoE switch for IEEE802.11n
high speed wireless LAN
- All ports have Giga interface needed to
power an 11n Wireless Access Point.
- Capacity for concurrent use of 2.4GHz and
5GHz with 1000Mbps bandwidth
• PoE+ supports Network Cameras or other
devices that require high-power
- Maximum 30W*1 power supply per a port.
• Buzzer and LED loop guard
• Supported USB flash recovery eliminates
• Supported USB flash recovery eliminates
or greatly reduces down-time
• 3 year warranty certified in Japan
BS-POE-G21M-EU
BS-POE-G21M-EU
Business Networking
PoE Easy
Buffalo Technology’s new Intelligent Power over Ethernet
switches for small and medium businesses provide enough
power to run IP cameras, and wireless access points – even
power capacity for concurrent use of 2.4GHz and 5GHz with
1000Mbps bandwidth – and other power-hungry devices.
switches for small and medium businesses provide enough
power to run IP cameras, and wireless access points – even
power capacity for concurrent use of 2.4GHz and 5GHz with
1000Mbps bandwidth – and other power-hungry devices.
And, with a Buffalo Switch in place, network administrators can
rest assured with Buffalo’s Loop Guard warning system. A loop
occurs if there is more than one path between two endpoints –
possible causes are multiple connections between two network
switches, or, two ports on the same switch connected to each
other. With Buffalo’s new Switches the offending port from which
the loop originates is immediately shut down and the switch gives
both a buzzer and LED alert. In the past administrators might
spend a considerable amount of time detecting and locating
such a problem, but with Buffalo’s new switches detection and
location are just a blinking light and buzzing buzz away.
rest assured with Buffalo’s Loop Guard warning system. A loop
occurs if there is more than one path between two endpoints –
possible causes are multiple connections between two network
switches, or, two ports on the same switch connected to each
other. With Buffalo’s new Switches the offending port from which
the loop originates is immediately shut down and the switch gives
both a buzzer and LED alert. In the past administrators might
spend a considerable amount of time detecting and locating
such a problem, but with Buffalo’s new switches detection and
location are just a blinking light and buzzing buzz away.
But best of all, Buffalo Technology’s Switches allow businesses to
gradually grow as their needs expand. PoE enables flexible placement
far from power outlets and thereby helps reduce wiring infrastructure
costs. Buffalo’s PoE switches have additional advanced features
including VLAN, and come with 8, 16, or 24 ports – all of which are PoE.
gradually grow as their needs expand. PoE enables flexible placement
far from power outlets and thereby helps reduce wiring infrastructure
costs. Buffalo’s PoE switches have additional advanced features
including VLAN, and come with 8, 16, or 24 ports – all of which are PoE.
Switches