Fujitsu D2607 S26361-F3976-L2 Data Sheet
Product codes
S26361-F3976-L2
Data Sheet
FUJITSU D2607 SAS/SATA RAID controller
Page 1 / 3
www.fujitsu.com/fts
Data Sheet
FUJITSU D2607 SAS/SATA RAID controller
D2607 SAS 6Gb/s based on LSI MegaRAID® for internal storage devices
Main Features
Benefits
6Gb/s SAS ports PCI Express® 2.0 x8
Connect up to 16 HDDs
LSISAS2008 6Gb/s
RAID levels 0 and 1 for more data security
Increased Read/Write performance
RAID spans 10
Data protection
Auto resume after loss of system power during array rebuild or
reconstruction
reconstruction
User Management Options
Seamless merging of the RAID management into system
management
management
The RAID concept (Redundant Array of
Independent Disks) refers to several independent
hard disks which form a large logical drive when
switched together.
Redundancy information is calculated from
several data blocks (except for RAID 0) and saved
distributed to the individual hard disks. Your
operating system no longer accesses the individual
hard disks, but the array.
The actual objective of the RAID concept is to
increase availability and prevent downtimes in
the event of a hard disk failure. However, the
theoretical security of the RAID concept is only as
good as the RAID controller used. Benefit from
the Fujitsu RAID controllers where technology,
experience and practical implementation all
ensure the security that your company needs in
the event of an emergency.
Independent Disks) refers to several independent
hard disks which form a large logical drive when
switched together.
Redundancy information is calculated from
several data blocks (except for RAID 0) and saved
distributed to the individual hard disks. Your
operating system no longer accesses the individual
hard disks, but the array.
The actual objective of the RAID concept is to
increase availability and prevent downtimes in
the event of a hard disk failure. However, the
theoretical security of the RAID concept is only as
good as the RAID controller used. Benefit from
the Fujitsu RAID controllers where technology,
experience and practical implementation all
ensure the security that your company needs in
the event of an emergency.
D2607 SAS/SATA RAID controller
The Fujitsu D2607 SAS/SATA RAID controller, based
on the LSI SAS2008, offers small businesses
exactly the low-cost data safety unit which they
have been looking for.
The D2607 enables increased read/write
performance thanks to its RAID 0, 1 and 10
implementation.
Benefit from the close alignment of the RAID
hardware system and the ServerView® RAID
Manager software which offers fast initialization
for quick array setup.
on the LSI SAS2008, offers small businesses
exactly the low-cost data safety unit which they
have been looking for.
The D2607 enables increased read/write
performance thanks to its RAID 0, 1 and 10
implementation.
Benefit from the close alignment of the RAID
hardware system and the ServerView® RAID
Manager software which offers fast initialization
for quick array setup.
Enjoy the world of easy configuration – and time
and cost efficiency that you have been searching
for – the Fujitsu D2607 RAID controller.
and cost efficiency that you have been searching
for – the Fujitsu D2607 RAID controller.