Altronix AL400ULXB2 Leaflet
Specifications
Agency Approvals
7.1"
(180.34mm)
4.5"
(114.3mm)
6.7"
(170.18mm)
3.7"
(93.98mm)
0.34"
(8.64mm)
0.182"
(4.62mm)
o0.156"
(3.96mm)
UL Recognized component for Access Control System Units (UL 294),
Standard for Power Supplies for Use with Burglar-Alarm Systems (UL 603),
Hospital Signaling and Nurse Call Equipment (UL 1069),
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
Standard for Power Supplies for Use with Burglar-Alarm Systems (UL 603),
Hospital Signaling and Nurse Call Equipment (UL 1069),
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
AL400ULXB2
Board Dimensions
(L x W x H) (approximate)
:
4.5” (114.3mm) x 7.1” (180.34mm) x 1.44” (36.57mm)
AL400ULXB2 is a UL Recognized power supply/charger which converts a 115VAC,
60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output.
60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output.
AL400ULXB2
Off-line Switching Power Supply/Charger
Rev. DSAL400ULXB2_11082012
Overview
Input:
• Input 115VAC, 60Hz, 3 amp.
• Input fuse rated @ 3.5 amp/250V.
• Input fuse rated @ 3.5 amp/250V.
Output:
• 12VDC or 24VDC selectable output.
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Class 2 Rated power limited output.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Class 2 Rated power limited output.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
Battery Backup (cont’d):
• Maximum charge current 0.7 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input, DC outputand Battery LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 24.57 or 36.85 BTU/Hr.
• System AC input VA requirement: 345VA.
• 24.57 or 36.85 BTU/Hr.
• System AC input VA requirement: 345VA.
Mechanical:
• Product weight (approx.): 1.4 lbs. (0.64 kg).
• Shipping weight (approx.): 1.6 lbs. (0.73 kg).
• Shipping weight (approx.): 1.6 lbs. (0.73 kg).