Fujitsu TX150 S8F LKN:T1508S0004FR Data Sheet
Product codes
LKN:T1508S0004FR
Data Sheet
Fujitsu Server PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server
Page 3 / 8
www.fujitsu.com/fts
Technical details
PRIMERGY TX150 S8
Housing types
Tower
Tower
Tower
Tower
Storage drive architecture
3.5-inch
3.5-inch
2.5-inch
2.5-inch
Power supply
Standard
Hot-plug
Standard
Hot-plug
Mainboard
Mainboard type
D 3079
Chipset
Intel® C602
Processor quantity and type
1 x Intel® Pentium® processor / Intel® Xeon® processor E5-1400 product family / Intel® Xeon® processor E5-2400
product family
product family
Memory slots
6 (6 DIMMs, 3 channels with 2 slots per channel)
Memory slot type
DIMM (DDR3)
Memory capacity (min. - max.)
2 GB - 96 GB
Memory protection
Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory notes
max. 96 GB registered; min. 2 GB unbuffered; Memory Mirroring with identical modules in both channel pairs of a
bank (2 modules per bank). Rank sparing with identical modules within the same channel. Performance Mode with
identical modules in all channels of each bank per CPU.
bank (2 modules per bank). Rank sparing with identical modules within the same channel. Performance Mode with
identical modules in all channels of each bank per CPU.
Interfaces
USB 2.0 ports
9 x USB 2.0 (2x front, 4x rear, 3x internal for backup, UFM and internal USB)
Graphics (15-pin)
1 x VGA
Serial 1 (9-pin)
1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45)
2 x Gbit/s Ethernet
Service LAN (RJ45)
1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C602, 2 ports used for accessible drives
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
SATA controller type notes
On board SATA controller supports RAID levels 0, 1, 10
Remote Management Controller
Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x4 (mech. x8)
2 x Full height 280 mm length
PCI-Express 3.0 x16
1 x Full height 280 mm length
PCI-Express 2.0 x1 (mech. x16)
1 x Full height 170 mm length
PCI-Express 2.0 x4 (mech. x8)
1 x Full height 230 mm length; preferred RAID slot
PCI-slots
1 x PCI 32/33 MHz, 1x long, 5V
Slot Notes
in SAS configuration 1x PCI-Express occupied by modular RAID controller.
Drive bays
Storage drive bays
3.5-inch or 2.5-inch hot-plug SAS/SATA
Accessible drive bays
3 x 5.25/1.6-inch
Notes accessible drives
all possible options described in relevant system configurator
Drive bays (Base unit specific)
Storage drive bays
Max 8 (4 + 4) x 3.5-inch
Max 16 (8 + 8) x 2.5-inch
Max 16 (8+ 8) x 2.5-inch