Fujitsu TX300S6 LKN:T3006S0112FR Data Sheet

Product codes
LKN:T3006S0112FR
Page of 9
Data Sheet
 Fujitsu PRIMERGY TX300 S6 Server 
Page 4 / 9
http://ts.fujitsu.com/Primergy
Memory Modules Independent Mode
2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
32 GB (1 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory Modules Mirrored Mode
4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
32 GB (2 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
64 GB (2 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory Modules Spare or Performance 
Mode
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
48 GB (3 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
96 GB (3 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Interfaces
USB ports
10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)
Graphics (15-pin)
2 x VGA (thereof 1x front optional)
Serial 1 (9-pin)
1 x serial RS-232-C,  usable for iRMC S2 or system or shared
Serial 2 (9-pin)
1 x serial RS-232-C
LAN / Ethernet (RJ-45)
2 x Gbit/s Ethernet
Service LAN (RJ45)
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller
Optionally integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
additional RAID controller options are described under Components RAID controller
SATA Controller
ICH10B, 2 x SATA channel for DVD
LAN Controller
Intel® 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), PXE-Boot via LAN from PXE server, iSCSI boot 
(also diskless) via onboard LAN
Remote Management Controller
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 2.0 x4 (mech. x8)
5 x Full height from 4 PCIe slots each two wired x4 slots can be combined to one wired x8 slot
one PCIe slot is occupied with one of two possible modular RAID controllers
PCI-Express 2.0 x8
2 x Full height , both are notched x8 slot as well for x16 cards
Slot Notes
Two of four PCI-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.
One PCIe Gen2 x4 slot is occupied with a modular RAID controller.
Drive bays
Storage drive bay configuration
6x 3.5-inch, for SAS / SATA or 12x 2.5-inch for SAS/SATA optional
Accessible drive bays
3 x 5.25/1.6-inch
Notes accessible drives
All possible options described in relevant system configurator.
Optional hard disk bays
2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x 5.25-inch bays)