Philips Pocket projector PPX3610 PPX3610/EU User Manual

Many laptops do not activate the external 
video output automatically when you connect 
a second display such as a projector. Check 
your laptop's manual to find out how to acti-
vate the external video output.

Use the VGA audio cable (not included) to connect the 
projector to a computer, laptop, or some PDAs. The 
projector supports the following resolutions: VGA/
SVGA/XGA. For best results, set the computer's reso-
lution to SVGA (800x600).

VGA

Y-Pb-Pr

HDMI

1 Connect the VGA audio cable (not supplied) to the 

projector's HDMI socket.

2 Connect the VGA plug to the mini-HDMI socket of 

the computer and the audio plug to the computer's 
audio output.

3 Adjust the computer's resolution to the correct set-

ting and switch the VGA signal to an external moni-
tor. The following resolutions are supported:

 

VGA

640 x 480

60 Hz

SVGA

800 x 600

60 Hz

XGA

1024 x 768

60 Hz

WXGA

1280 x 768

60 Hz

FULL HD

1920 x 1080

60 Hz

You can obtain the best results with the 
800¦×¦600 (60Hz) resolution.

4 Select Menu > Source and switch to VGA.

Use the projector's audio/video adapter cable (A/V 
cable) (not included) to connect camcorders, DVD 
players or digital cameras. The jacks for these devices 
are yellow (video), red (audio right) and white (audio 
left).

VGA

Y-Pb-Pr

HDMI

1 Connect the supplied A/V cable to the 

 socket of 

the projector.

2 Connect the video device's audio/video sockets to 

the A/V cable using a conventional composite video 
(RCA) cable.

3 Select Menu > Source and switch to AV.

Some video devices (e.g.: pocket multimedia players, ...) 
require specific connection cables. There are either 
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the 
original cables from the device manufacturer may func-
tion.

VGA

Y-Pb-Pr

HDMI

See the multimedia device instruction manual 
to find out how to switch the signal output to 
this jack.