Teldat bintec W2003n-ext 5510000325 User Manual
Product codes
5510000325
bintec W2003n-ext
25.11.2013
Subject to technical alterations
Page 8 / 9
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
Maintenance
External reporting: eMail alert
Automatic eMail alert by definable events (predefined events: new neighbor AP found, new rogue
AP found, new slave AP found, managed AP failed)
AP found, new slave AP found, managed AP failed)
External reporting: SNMP traps
Supported
Monitoring:
Monitoring: Internal Log
Output via web-based configuration interface (http/https); filter: subsystem, level, message
Monitoring: Interfaces
Statistic information of all physical and logical interfaces
Monitoring: WLAN
Detailed displays for radio, VSS. Displayed are per link: MAC address, IP address, TX packets, RX
packets, signal strength for every receiving aerial, signal-to-noise ratio, data rate
packets, signal strength for every receiving aerial, signal-to-noise ratio, data rate
Monitoring: Configurable
scheduler (standalone AP)
scheduler (standalone AP)
In the operation mode 'standalone AP' the following events can be scheduled: Reboot device,
activate/deactivate interface, activate/deactivate WLAN SSID, initiate 5 GHz band scan, trigger SW
update, trigger configuration backup
activate/deactivate interface, activate/deactivate WLAN SSID, initiate 5 GHz band scan, trigger SW
update, trigger configuration backup
Monitoring: Configurable
scheduler (WLAN Controller)
scheduler (WLAN Controller)
In the operation mode 'WLAN Controller' the following events can be scheduled:
Activate/deactivate WLAN SSID, initiate Neighbor band scan
Activate/deactivate WLAN SSID, initiate Neighbor band scan
Management: Supported
management systems
management systems
WLAN Controller, DIME Manager, XAdmin
Management: Discovery Protocol
CAPWAP DHCP option according RFC1517
Management: WLAN Controller
functionallity
functionallity
Can act as stand-alone AP without WLAN controller; can act for small installation with up to 6 AP as
WTP-AC (Master AP); can act as WTP (Managed by a WLAN Controller)
WTP-AC (Master AP); can act as WTP (Managed by a WLAN Controller)
Documentation
German and English documentation on CD and in the Internet for download
Guarantee
2-year manufacturer's guarantee, online RMA handling
Hardware
Standards and certifications
R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 300 328; EN 301 489-17; EN 301 489-1;
EN 301 893; EN 60601-1-2 (medical electrical devices - Part 1-2)
EN 301 893; EN 60601-1-2 (medical electrical devices - Part 1-2)
LAN / WAN
2 x 10/100/1000 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
WLAN
Two independent high-performance radio modules IEEE 802.11abgn Mimo 2x2 for operation at 2.4
(100 mW) and 5 GHz (200 mW)
(100 mW) and 5 GHz (200 mW)
Antenna
Two external antenna with Omni characteristic for each radio module, RSMA socket, approx. 1,5
dBm gain
dBm gain
Real time clock
Even at power loss the system time will be available for several hours.
Power supply
External wall power supply 230V / 9V DC, 1,3A, with high efficient switching power supply (The wall
adapter is a accessory and not include the shipment).
adapter is a accessory and not include the shipment).
PoE
Power-over-Ethernet according IEEE 802.3af, compatible with 802.3at PoE injectors
Status LEDs
Status, Activity for WLAN1, WLAN2 and Ethernet
Wall and ceiling mounting
Include the package
Desktop operation
Possible, rubber pad included the package
Theft protection
Theft protection integrated, Kensington ® compatibel
Dimensions
Approx. 15.9 cm x 14.5 cm x 4.3 cm (width x depth x hight)