Teldat bintec WI1065n 5010590013 User Manual
Product codes
5010590013
bintec WI1065n
11.12.2013
Subject to technical alterations
Page 2 / 10
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
Industry-proof outdoor access point
The W1065n is an outdoor (IP65) 11n access point with a dual-band radio module. It can be used
for a wide range of applications such as creating line-of-site radio links and can requires no
additional modifications for outdoor operation.
for a wide range of applications such as creating line-of-site radio links and can requires no
additional modifications for outdoor operation.
Product description
•
•
•
•
•
•
•
•
Prepared for mounting directly on the mast (a mast fixture is
additionally required)
Operation permissible with up to 4000 mW transmission power*
VPN IPsec hardware encryption
WAN optionally via Ethernet or optical fiber cable
Operation as fat AP or as controller based AP via bintec WLAN
controller
additionally required)
Operation permissible with up to 4000 mW transmission power*
VPN IPsec hardware encryption
WAN optionally via Ethernet or optical fiber cable
Operation as fat AP or as controller based AP via bintec WLAN
controller
* Operation with 4000 mW EiRP is permissible in Germany and Great
Britain in the 5.8 GHz band and requires registration or licensing from
the regulatory authorities. It is possible to attain 4000 mW EiRP using
the right antennas.
Britain in the 5.8 GHz band and requires registration or licensing from
the regulatory authorities. It is possible to attain 4000 mW EiRP using
the right antennas.
The bintec WIx065n series devices are industry-proof outdoor access
points with protection class IP65, which are versatile in their use and
can be installed outdoors without additional measures. According to the
model, the devices are equipped with one or two IEEE 802.11agbn
standard wireless modules. PHY rates of up to 300 Mbps per wireless
module can be achieved as a result.
points with protection class IP65, which are versatile in their use and
can be installed outdoors without additional measures. According to the
model, the devices are equipped with one or two IEEE 802.11agbn
standard wireless modules. PHY rates of up to 300 Mbps per wireless
module can be achieved as a result.
WIx065n as a high-performance bridgelink
The WI1065n is ideally suited for setting up high-performance line-of-sight radio links. Installation
directly on the mast enables the use of very short, low-loss antenna cables thus improving the
already very good performance of the devices. Using dual-polarized antennas, 11n technology
allows separate data flows to be transmitted in parallel. Dual polarization antennas consist of two
antenna segments, which are polarized orthogonally to each other. They, therefore, provide two
cable connections. This means that the WI1065n transmits two separated partial streams from a
to b, as defined by IEEE 802.11n. The data rate is more than tripled as compared with the
previously applied technology. The combination of bintec WIx065n devices with Teldat
dual-polarization antennas allows net data rates of approx. 75 Mbps (TCP/IP) at a distance of
1000 m, for example.
The WI1065n is ideally suited for setting up high-performance line-of-sight radio links. Installation
directly on the mast enables the use of very short, low-loss antenna cables thus improving the
already very good performance of the devices. Using dual-polarized antennas, 11n technology
allows separate data flows to be transmitted in parallel. Dual polarization antennas consist of two
antenna segments, which are polarized orthogonally to each other. They, therefore, provide two
cable connections. This means that the WI1065n transmits two separated partial streams from a
to b, as defined by IEEE 802.11n. The data rate is more than tripled as compared with the
previously applied technology. The combination of bintec WIx065n devices with Teldat
dual-polarization antennas allows net data rates of approx. 75 Mbps (TCP/IP) at a distance of
1000 m, for example.
As another highlight, besides the previous wireless frequencies in the 2.4 GHz and 5 GHz range,
the bintec WIx065n series devices also support sub-band 3 in the 5 GHz range (5755-5825MHz).
In Germany and Great Britain this frequency band is enabled for the operators of Internet
services to operate BFWA (Broadband Fixed Wireless Access) applications with up to 4 Watt
transmission power (EiRP). This considerably simplifies Internet connection of small communities
without DSL for many professional Internet providers, but also community groups.
the bintec WIx065n series devices also support sub-band 3 in the 5 GHz range (5755-5825MHz).
In Germany and Great Britain this frequency band is enabled for the operators of Internet
services to operate BFWA (Broadband Fixed Wireless Access) applications with up to 4 Watt
transmission power (EiRP). This considerably simplifies Internet connection of small communities
without DSL for many professional Internet providers, but also community groups.
WIx065n outdoors to supply mobile subscribers
No matter whether you plan a wide area hotspot outdoors or have to provide WLAN for a large
No matter whether you plan a wide area hotspot outdoors or have to provide WLAN for a large
bintec WI1065n