Teldat bintec W2003n 5510000324 User Manual
Product codes
5510000324
bintec W2003n
29.11.2013
Subject to technical alterations
Page 8 / 10
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
Security
Encryption WEP/WPA
WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2
enterprise
enterprise
IEEE802.11i authentication and
encryption
encryption
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP
encryption, AES encryption, 802.1x/EAP
encryption, AES encryption, 802.1x/EAP
Access control list (ACL)
MAC address filter for WLAN clients (white list) and dynamic and static blacklist. Black list function
requires WLAN Controller
requires WLAN Controller
WIDS (Wireless Intrution
Detection System)
Detection System)
Rogue AP detection: detect foreign Aps, which try to spy out data via SSIDs by permanent
background scanning. This functionality requires WLAN Controller.
background scanning. This functionality requires WLAN Controller.
WIDS (Wireless Intrution
Detection System)
Detection System)
Rogue Client Detection: detection and protection: detect conspicuous clients, which try to intrude
or interfere the wireless network.In threat case blocking by dynamic black list. This functionality
requires WLAN Controller.
or interfere the wireless network.In threat case blocking by dynamic black list. This functionality
requires WLAN Controller.
WIDS (Wireless Intrution
Detection System)
Detection System)
Neighbor AP Detection: detection of neighbor Aps with possible influence on performance of own
network. By detected intrusion: SNMP trap or email alert. This functionality requires WLAN
Controller.
network. By detected intrusion: SNMP trap or email alert. This functionality requires WLAN
Controller.
VLAN
Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration
according IEEE 802.1q; up to 32 VLANs supported.
according IEEE 802.1q; up to 32 VLANs supported.
Inter cell repeating
Inter traffic blocking for public HotSpot (PHS) applications for preventing of communication radio
client to radio client in a single radio cell.
client to radio client in a single radio cell.
NAT/PAT
Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network from
public access
public access
Energy Savining Functions
Mimo 1x1 shift down
The radio modules switching automatic to Mimo 1x1 operation, when no client is connected
802.3az support
The ethernet interfaces reduce the power consumption automatically, in case that no device is
connected. In the case of the usage of a short ethernet cable, the circuit reduce the transmit
power.
connected. In the case of the usage of a short ethernet cable, the circuit reduce the transmit
power.
LED Mode
The LEDs has three operation mode: Status, Flashing, Off
Maintenance
Configuration a. maintenance:
Configuration a. maintenance:
Device configuration via
Device configuration via
Telnet, SSH, HTTP, HTTPS, SNMP
Configuration a. maintenance:
SNMP
SNMP
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access
list configurable
list configurable
Configuration a. maintenance:
SNMP configuration
SNMP configuration
Complete management with MIB-II, MIB 802.11, enterprise MIB
Configuration a. maintenance:
SSH Login
SSH Login
Supports SSH V1.5 and SSH V2.0, for secure connections of terminal applications
Configuration a. maintenance:
HTTP/HTTPS
HTTP/HTTPS
Web-based configuration (FCI). The user interface is identical with almost all bintec elmeg
products.
products.