Philips Anti-scale cartridge GC002/00 GC002/00 User Manual

Problem

Possible cause

Solution

The ironing board 

cover becomes 

wet or water 

droplets come out 

of the soleplate.

Steam has condensed on 

the ironing board cover 

after a long ironing session.

Replace the ironing board cover if the foam material 

has worn out. You can also add an extra layer of felt 

material under the ironing board cover to prevent 

condensation on the ironing board.

You may have an ironing 

board that is not designed 

to cope with the high steam 

rate of the steam generator.

Put an extra layer of felt material under the ironing 

board cover to prevent condensation on the ironing 

board.

There is too much 

steam coming out 

of the iron.

The default setting of the iron 

is the OptimalTemp setting. In 

this setting the iron provides 

a high steam output.

Activate the ECO mode to iron with a lower 

steam output. See section ‘Energy saving’ in this user 

manual.

This iron has been approved by The Woolmark Company Pty Ltd for 

the ironing of wool only products provided that the garments are ironed 

according to the instructions on the garment label and those issued by the 

manufacturer of this iron. R1303. In United Kingdom, Eire, HongKong and 

India, the Woolmark trademark is a Certification trademark.

13