Wilson Electronics WC 1075 WC1075 Leaflet
Product codes
WC1075
Part Number
WC 1065
WC 1075
Frequency
824-894 MHz / 1850-1990 MHz 824-894 MHz / 1850-1990 MHz
Gain
62 dB / 65 dB
70 dB / 75 dB
Max Uplink Power
3 Watts EIRP
3 Watts EIRP
Max Downlink Power
26 dBm / 25 dBm
26 dBm / 25 dBm
Noise Figure
3 dB / 4 dB nominal
3.5 dB nominal
Flatness
±5 dB
±5 dB
Power
Requirements
6 V AC / 3 A max
6 V AC / 3 A max
Connectors
F-Female
F-Female
Dimensions
5.7 x 4.2 x 1.5 in
14.0 x 10.8 x 3.9 cm
5.7 x 4.2 x 1.5 in
14.0 x 10.8 x 3.9 cm
Weight
1.5 lbs / 0.7 kg
1.5 lbs / 0.7 kg
The new WC 1065 and 1075 cellular signal boosters from Wilson Electronics
are wireless, dual-band, boosters designed especially for the Custom
Home Integration market. With gain of 65dB and 75dB respectively,
they provide a substantial boost to cellular signals resulting in greater
coverage areas inside homes, offices and commercial spaces. 75ohm
“F” connectors eliminate the need for new tools or cable stocks. RG6
or RG11 coax, already used by most installers, does the job. Adjustable
gain controls allow the installer to set separate gain levels for 850 MHz
and 1900 MHz frequencies. This gives the installer greater flexibility in the
location of the booster’s inside and outside antennas, and helps optimize
the booster’s gain to match the precise requirements of the installation.
WC signal boosters support multiple simultaneous connections, and
work with all cellular devices operating on North American 850 MHz
and 1900 MHz networks (except Nextel/iDEN). Wilson boosters feature
cell site protection technologies developed through cooperative effort
between Wilson and several major cellular carriers that prevent the
possibility of interference with any nearby cell tower.
are wireless, dual-band, boosters designed especially for the Custom
Home Integration market. With gain of 65dB and 75dB respectively,
they provide a substantial boost to cellular signals resulting in greater
coverage areas inside homes, offices and commercial spaces. 75ohm
“F” connectors eliminate the need for new tools or cable stocks. RG6
or RG11 coax, already used by most installers, does the job. Adjustable
gain controls allow the installer to set separate gain levels for 850 MHz
and 1900 MHz frequencies. This gives the installer greater flexibility in the
location of the booster’s inside and outside antennas, and helps optimize
the booster’s gain to match the precise requirements of the installation.
WC signal boosters support multiple simultaneous connections, and
work with all cellular devices operating on North American 850 MHz
and 1900 MHz networks (except Nextel/iDEN). Wilson boosters feature
cell site protection technologies developed through cooperative effort
between Wilson and several major cellular carriers that prevent the
possibility of interference with any nearby cell tower.
Wilson Electronics’ WC 1065 & 1075 Dual-Band
Cellular Signal Booster for Certified Installations
www.wilsonelectronics.com
FEATURES
• Separate adjustable gain controls for
optimum signal boost
• Provides a strong, reliable signal even in weak
signal areas
• Compatible with North American 800 and
1900 MHz cellular networks*
• Configurable with a variety of Wilson cellular
antennas and in-line signal boosters to fit
virtually any large building installation
• FCC type accepted, Industry Canada
certificated
BENEFITS FOR USERS
• Fewer dropped calls and lost connections
• Faster, cleaner data transfers (2G &3G
• Faster, cleaner data transfers (2G &3G
networks)
• Enjoy strong bi-directional (incoming &
outgoing) signals
• Multiple devices can access the boosted
signal simultaneously
• Extends cellular device battery life
BENEFITS FOR INSTALLERS
• Optimal up-sell for residential and
commercial installers
• Protected distribution through WC-certified
installers only
• Adjustable gain controls simplify
installation process
• F Connectors require no new tools or
cable stocks
MADE IN
THE USA
The New Cellular Installer Series
WC 1065 & WC 1075 Dual-Band
Cellular Signal Booster
WC12065_WC1075_SS_11-08-12_R08