Equip Professional Modular Crimping Tool 129404 Data Sheet
Product codes
129404
Instructions
To open the handles squeeze handles until it stops.
1a Insert the 4P or 6P cable from the two-bladed side
of the stripper until it touches the stop guide
(stripping length 6mm).
(stripping length 6mm).
1b Insert the 8P cable between the two stripper blades
and let it extend a little over the lower cut blade.
2
Squeeze handles until stop, keep the cable perpendicular
and then pull from the tool.
and then pull from the tool.
3
Insert round cables into the round stripping hole,
squeeze handles until stop, turn the tool in counter
clockwise direction and the cable in clockwise direction
simultaneously, pull from the tool.
squeeze handles until stop, turn the tool in counter
clockwise direction and the cable in clockwise direction
simultaneously, pull from the tool.
4
Insert the stripped cable into the plug and make sure
that the left wire at one end matches the right wire
at the other end.
that the left wire at one end matches the right wire
at the other end.
5
Place the modular plug with cable into the tool's holder.
Be sure the stripped wire is between the tab and the gold
contacts. Squeeze the handles until stop.
Be sure the stripped wire is between the tab and the gold
contacts. Squeeze the handles until stop.
6
Remove the crimped plug from the tool.
7
To release the ratchet turn the screw on the ratchet
in counterclockwise direction.
in counterclockwise direction.
8
To crimp DEC plugs remove the screw on the left side
of the 6P holder, insert the DEC plug with cable into
the 6P holder and squeeze handles until stop.
of the 6P holder, insert the DEC plug with cable into
the 6P holder and squeeze handles until stop.
Datasheet
www.equip-info.net
Package Contents
Q
1x Crimping Tool Professional
Q
1x Screw Driver
Crimping 8P8C/RJ45 - 6P6C/RJ12 - 6P4C/RJ11 - 4P4C/4P2C
Crimping Tool Professional
1a
1b
2
3
4
5
6
7
8