Fujitsu MAT3300FC User Manual
2.2 Status Byte
C141-C008
2-7
(1) GOOD status
This status indicates that execution of the command ended normally.
(2) CHECK CONDITION status
This status is reported in the case of a)~c) below. The IDD generates sense data when
this status is reported and displays the detailed cause. The IDD transfers the generated
sense data together with this status report in the same FCP_RSP frame. Therefore, it is
unnecessary to gather sense data using the REQUEST SENSE command.
this status is reported and displays the detailed cause. The IDD transfers the generated
sense data together with this status report in the same FCP_RSP frame. Therefore, it is
unnecessary to gather sense data using the REQUEST SENSE command.
a) If the sense key in the sense data shows RECOVERED ERROR [= 1], it shows
that the last command, which resulted in the CHECK CONDITION status,
ended normally in conjunction with error recovery processing by the IDD.
ended normally in conjunction with error recovery processing by the IDD.
b) If the sense key in the sense data shows UNIT ATTENTION [= 6], it shows
that the IDD is being kept in the Unit Attention state. For details of the Unit
Attention state, see item 2.5.
Attention state, see item 2.5.
c) Any cases other than the above indicate that it was impossible to execute the
command or the command ended abnormally.
(3) CONDITION MET Status
Not supported.
(4) BUSY status
Not supported.
(5) INTERMEDIATE status
Not supported.
(6) INTERMEDIATE CONDITION MET Status
Not supported.
(7) RESERVATION CONFLICT status
This status indicates that the IDD is currently reserved by another INIT and use is
impossible until the reservation status is released. Normally, an INIT that receives
this status, reissues the original command after waiting for the appropriate period
of time only.
impossible until the reservation status is released. Normally, an INIT that receives
this status, reissues the original command after waiting for the appropriate period
of time only.
(8) COMMAND TERMINATED status
Not supported.
(9) TASK SET FULL status
This status is reported when there is no empty space in the command queue and
the IDD cannot register tagged commands it has received in the command queue.
the IDD cannot register tagged commands it has received in the command queue.