Vigitron VI1062 Leaflet

• Quality color and B&W video up to 750 feet (228 m) 
  of unshielded twisted pair wires
• 3,500 feet (1,066 m) with Vigitron active receivers
• NTSC, PAL , and SECAM video formats
• Support for "up-the-coax" type signals 
• No power required
• Built-in differential surge protection
• 60 dB crosstalk and noise immunity
• 500V DC isolation voltage
• Compact size and easy installation
• Compatible with all qualified UTP cameras
• Limited lifetime warranty

• Security and surveillance
• Casino security
• Hospitals and airports
• School campuses

DSVi1062_0410

The Vigitron Vi1062 is a passive transceiver that includes a built-in video isolation transformer and transports video signals over unshielded 

twisted pair wires, point-to-point, for distances up to 750 feet (228 m).  Distances up to 3,500 feet (1,066 m) can be achieved when it is 

used with Vigitron active UTP receivers.  It uses Category 2-7 twisted pair wires, is easy to install, cost effective, and does not require 

power. 

The annoying and potentially damaging hum bars on the screen are caused by ground voltage potential differences between your video 

equipment that is called ground loop. The Vi1062 provides complete isolation between devices and eliminates video hum bars, ground 

loops, and DC offsets which can degrade picture quality and potentially damage the video equipment.  Its wide bandwidth and low insertion 

loss makes it an ideal solution for eliminating ground loop problems for a wide variety of applications.

 

The Vi1062 has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity 

ensure quality video signals. The Vi1062 offers quality video in a compact size.  

The smart choice for quality video   

 

 

      

www.vigitron.com

Cat-5

16 Coax Jumpers

Vi1016  16-Ch. Passive Receiver

Cat-5

Cat-5