Promise Technology FastTrak TX4310, Retail F29F43100MM0000 Leaflet
Product codes
F29F43100MM0000
Cost-effective RAID 0/1/5/10 controller
with SATA 3Gb/s drive support for
motherboards with a PCI interface
with SATA 3Gb/s drive support for
motherboards with a PCI interface
FastTrak® TX4310
4-Port SATA RAID Adapter
FastTrak® TX4310 highlights
::
4 Serial ATA 3Gb/s Ports for support
of up to 4 drives
::
RAID 0/1/5/10 and JBOD
::
PCI 32-bit / 66 MHz
::
Native Command Queuing
::
Large LBA support for drives above
137GB
::
Disk Activity LED Headers
::
Combine with the SuperSwap 1100
or SuperSwap 4100 for an advanced
internal storage system
internal storage system
Cost-effective SATA RAID 0/1/5/10 PCI Adapter
The Promise FastTrak TX4310 4-port SATA RAID PCI adapter offers a low-cost solution
for implementing a RAID 0, RAID 1, RAID 5 or RAID 10 storage system with up to four
high-performance Serial ATA disk drives. Promise Technology is the leading provider of
Serial ATA interface solutions, and with the FastTrak TX4310, users can benefit from
Promise’s experience in maximizing Serial ATA storage system performance.
for implementing a RAID 0, RAID 1, RAID 5 or RAID 10 storage system with up to four
high-performance Serial ATA disk drives. Promise Technology is the leading provider of
Serial ATA interface solutions, and with the FastTrak TX4310, users can benefit from
Promise’s experience in maximizing Serial ATA storage system performance.
Promise’s Proven FastTrak RAID Engine
The FastTrak TX4310 leverages Promise's proven RAID 0/1/5/10 software engine
for fast, efficient, and reliable RAID. Use RAID 0 for massive capacity and maximum
performance, RAID 1 for data protection, RAID 5 for maximum data protection and
four-drive RAID 10 for data protection and performance enhancement. Promise's
RAID engine also offers performance-enhancing technology like elevator seek and load
balancing for efficient performance. For maximum uptime, the FastTrak supports features
like transparent data recovery and drive rebuilds performed in the background.
for fast, efficient, and reliable RAID. Use RAID 0 for massive capacity and maximum
performance, RAID 1 for data protection, RAID 5 for maximum data protection and
four-drive RAID 10 for data protection and performance enhancement. Promise's
RAID engine also offers performance-enhancing technology like elevator seek and load
balancing for efficient performance. For maximum uptime, the FastTrak supports features
like transparent data recovery and drive rebuilds performed in the background.
SATA 3Gb/s Support
The controller supports SATA 3Gb/s drives and conforms to Serial ATA II, Extensions to
SATA 1.0a specification with Native Command Queuing and Disk Activity LED headers
support. Command Queuing increases I/O performance by intelligently reordering data
requests so that the data can be more quickly accessed than if the commands weren't
ordered.
SATA 1.0a specification with Native Command Queuing and Disk Activity LED headers
support. Command Queuing increases I/O performance by intelligently reordering data
requests so that the data can be more quickly accessed than if the commands weren't
ordered.
Advanced HBA Features
The low-profile form factor FastTrak TX4310 PCI adapter incorporates many of Promise
Technology’s advanced host bus adapter features. The 66MHz PCI bus supports up to
266MB/sec burst data transfer rate. The FastTrak TX4310 also includes large LBA support
for drives above 137GB, and its onboard BIOS automatically identifies and configures
drive type.
Technology’s advanced host bus adapter features. The 66MHz PCI bus supports up to
266MB/sec burst data transfer rate. The FastTrak TX4310 also includes large LBA support
for drives above 137GB, and its onboard BIOS automatically identifies and configures
drive type.
Fa
st
Tr
ak
®
T
X
43
10
S
A
TA
R
A
ID
A
da
pt
er