Gorenje RK60359OCH 444690 User Manual

260437

Tools required: ring spanner (box-end wrench) No. 8, screwdriver, torx25, fl athead 
screwdriver
1. Use a fl athead screwdriver to remove the hole plugs/covers A and B1. 
2. Unscrew and remove – one by one, in the specifi ed order from top to bottom – the hinges (C, D, 

and E1) and the door (F, G). Make sure the door is not damaged. 

3. Move the hole plugs / covers (H) to the opposite side. 
4. Attach the lower hinge (E2, supplied in a bag) to the opposite side of the housing and add the 

washer (I). 

5. Upper door (F): Move the upper hinge (C) with the bearing (J) to the opposite side. Remove the 

door stopper with the hinge (K1) and attach a symmetrical door stopper (K2, supplied in a bag) 
to the opposite side.

6. Lower door (G): move the hinges (L) and the cover (M) to the opposite side. 
7. Install / attach, from bottom up, the hinges (D, C) and doors (G, F). Do not forget to install the 

washers in the same way they were installed before disassembling (I). 

8. Install the covers A and B2 (cover B2 from the supplied bag). 
9. Replacing the handle: remove the hole plugs/covers, unscrew the screws and attach the 

handle to the opposite side. Insert the plugs into the holes on the opposite side.

10