Panduit PZWC35I Leaflet
w w w. p a n d u i t . c o m
k e y f e a t u r e s a n d b e n e f i t s
a p p l i c a t i o n s
t e c h n i c a l i n f o r m a t i o n
s p e c i f i c a t i o n s
The wireless access point (WAP) enclosures shall be constructed from
aluminum and shall meet UL 2043 certifications for use in plenum areas.
The enclosures shall be capable of housing a Cisco^ 1140, 1260, 2600
and 3500 series wireless access point where integral antenna surfaces
shall be exposed and external antennas shall protrude through the
door. The wireless access points shall drop out of the enclosures on a
hinged mounting bracket or remain behind a swing-open door, at which
time the back of the wireless access point will be fully accessible for
commissioning. Space in the back of the enclosure shall be capable of
accepting the wireless access point power supply and slacking of cable.
The integral ceiling tile wireless access point enclosure and 2' x 2' ceiling
tile shall be one piece and shall replace a conventional 2' x 2' suspended
ceiling tile. The wall or ceiling mount wireless access point enclosure
shall be two pieces consisting of a separate enclosure and 2' x 2' bracket
set and shall replace a conventional 2' x 2' suspended ceiling tile.
aluminum and shall meet UL 2043 certifications for use in plenum areas.
The enclosures shall be capable of housing a Cisco^ 1140, 1260, 2600
and 3500 series wireless access point where integral antenna surfaces
shall be exposed and external antennas shall protrude through the
door. The wireless access points shall drop out of the enclosures on a
hinged mounting bracket or remain behind a swing-open door, at which
time the back of the wireless access point will be fully accessible for
commissioning. Space in the back of the enclosure shall be capable of
accepting the wireless access point power supply and slacking of cable.
The integral ceiling tile wireless access point enclosure and 2' x 2' ceiling
tile shall be one piece and shall replace a conventional 2' x 2' suspended
ceiling tile. The wall or ceiling mount wireless access point enclosure
shall be two pieces consisting of a separate enclosure and 2' x 2' bracket
set and shall replace a conventional 2' x 2' suspended ceiling tile.
Lockable enclosure
Protects against tampering and theft, reducing the cost
of ownership
of ownership
Poke through design
Integral antenna surface is exposed while connection side
is protected behind a lock
is protected behind a lock
UL 2043 certified
Can be used in plenum environments
Provisions for power
Enables greater design flexibility to deploy WAP using PoE or
conventional 110V Power
conventional 110V Power
One piece ceiling mount –
Integrated ceiling bezel allows unit to replace 2' x 2' ceiling tile reducing
PZWC35I
installation time and providing an aesthetic appearance
Hinged design
The WAP swings out of the enclosure on a hinged bracket
maintaining a secure attachment while allowing access to the back of
the WAP and its connections for easy provisioning of the WAP
maintaining a secure attachment while allowing access to the back of
the WAP and its connections for easy provisioning of the WAP
Wall or ceiling mount –
Enclosures can be mounted directly to the wall or ceiling. The
PZWC35 and PZWC35E
PZW2X2DCB or PZWIFIDCB bracket kits allow units to replace
2' x 2' ceiling tile reducing installation time and providing an
aesthetic appearance
2' x 2' ceiling tile reducing installation time and providing an
aesthetic appearance
Hinged cover design
Cover opens exposing the WAP while maintaining a secure attachment
and allowing entry to the back of the WAP and its connections for
easy accessibility
and allowing entry to the back of the WAP and its connections for
easy accessibility
PanZone
®
Wireless Access Point Enclosures
S P E C I F I C A T I O N S H E E T
Wireless access
Cisco Aironet^ 3500I series with integral antenna
point compatibility:
Cisco Aironet^ 2600I series with integral antenna
Cisco Aironet^ 1140 series with integral antenna
Cisco Aironet^ 1260 or 3500E with external antenna
Cisco Aironet^ 1140 series with integral antenna
Cisco Aironet^ 1260 or 3500E with external antenna
Dimensions:
PZWC35I: 23.8"H x 23.8"W x 3.1"D (603mm x 603mm x 78mm)
PZWC35: 13.75"H x 12.00"W x 3.1"D (350mm x 305mm x 78mm)
PZWC35E: 13.75"H x 12.00"W x 3.1"D (350mm x 305mm x 78mm)
PZWC35: 13.75"H x 12.00"W x 3.1"D (350mm x 305mm x 78mm)
PZWC35E: 13.75"H x 12.00"W x 3.1"D (350mm x 305mm x 78mm)
Packaging:
Package includes wireless access point enclosure, lock, assembly
hardware, and installation instructions
hardware, and installation instructions
^Cisco and Aironet are registered trademarks of Cisco Technology, Inc.
PanZone
®
Wireless
Access Point Enclosures
Integral ceiling tile
enclosure for Cisco
Aironet^ 1140, 2600I
and 3500I series:
enclosure for Cisco
Aironet^ 1140, 2600I
and 3500I series:
PZWC35I
Wall or ceiling mount
enclosure for Cisco
Aironet^ 1140, 2600I
and 3500I series:
enclosure for Cisco
Aironet^ 1140, 2600I
and 3500I series:
PZWC35
Wall or ceiling mount
enclosure for Cisco
Aironet^ 1260 and
3500E series:
enclosure for Cisco
Aironet^ 1260 and
3500E series:
PZWC35E
PanZone
®
Wireless
Access Point Enclosure Accessories
2' x 2' in-ceiling
mounting bracket
kit for PZWC35
and PZWC35E:
mounting bracket
kit for PZWC35
and PZWC35E:
PZW2X2DCB
In-ceiling mounting
bracket kit for
PZWC35 and
PZWC35E:
bracket kit for
PZWC35 and
PZWC35E:
PZWIFIDCB
DP
O
E
™
Power Patch Panel
24-port:
DPOE24U1XG
DP
O
E
™
Power Hub
Compact 8
midspan:
midspan:
DPOE8S2XG
PanZone
®
Wireless Access Point Enclosures are
used to protect a wireless network from tampering,
vandalism, and theft by enclosing WAPs. These
products were specifically designed for optimized
use with Cisco Aironet^, WAPs that support IEEE
802.11a, b, g and n (draft 2.0) standards.
vandalism, and theft by enclosing WAPs. These
products were specifically designed for optimized
use with Cisco Aironet^, WAPs that support IEEE
802.11a, b, g and n (draft 2.0) standards.
The PZWC35I enclosure is ceiling mounted and
replaces a conventional 2' x 2' suspended ceiling
tile. The WAP swings out of the enclosure on a
hinge bracket, facilitating easy commissioning.
The PZWC35 and PZWC35E can be wall or
ceiling mounted, replacing a conventional 2' x 2'
suspended ceiling tile with an optional bracket kit.
The WAP remains on an internal bracket when the
door is opened for easy commissioning. The
enclosures can be used in plenum spaces and
are UL 2043 certified.
replaces a conventional 2' x 2' suspended ceiling
tile. The WAP swings out of the enclosure on a
hinge bracket, facilitating easy commissioning.
The PZWC35 and PZWC35E can be wall or
ceiling mounted, replacing a conventional 2' x 2'
suspended ceiling tile with an optional bracket kit.
The WAP remains on an internal bracket when the
door is opened for easy commissioning. The
enclosures can be used in plenum spaces and
are UL 2043 certified.