Philips PPX3610 PPX3610/F7 User Manual

2 Insert the new batteries into the battery compart-

ment with the positive and negative poles as shown 
on the back of the remote control. Make sure the 
polarities(+ and -) are aligned correctly.

3 Push the battery compartment back into the remote 

control until the locking mechanism engages.

Normally the batteries will last for around 
one year. If the remote control stops working, 
please replace the batteries. If the device  is 
not used for a long time, take out the batter-
ies. This will prevent leakage and possible 
damage to the remote control.

The used batteries should be disposed of 
according to the recycling regulations of your 
country.

Point the remote control at the remote sensor on the 
back of the device. The remote can be used within an 
angle of 60 degrees and up to 16.4 feet (5 meters) from 
the device. When using the remote control, no obstacle 
should be placed between the remote control and 
remote sensor.

VGA

Y-Pb-Pr

HDMI

• The improper use of batteries can lead 

to overheating, explosion, risk of fire 
and injury. Leaking batteries can possibly 
damage the remote control.

• Never expose the remote control to 

direct sunlight.

• Avoid deforming, dismantling or charg-

ing the batteries.

• Avoid exposure to open fire and water.
• Replace empty batteries immediately.
• Remove the battery from the remote 

control if not in use for long periods of 
time.