Philips PPX3610 PPX3610/F7 User Manual

Please use this type of connection to obtain the highest 
possible image quality. This cable is available as an acces-
sory. The device jacks have the colours green (Y), blue 
(U/Pb), red (V/Pr) for the video signal and red (audio 
right) and white (audio left) for the audio signal.

VGA

Y-Pb-Pr

HDMI

1 Connect the video component cable (accessory) to 

the projector's HDMI socket.

2 Connect the video device's appropriate coloured 

sockets to the component video cable of the projec-
tor using a conventional component video (RCA) 
cable.

Note that the YPbPr outlets are labelled 
YCbCr on some devices.

When connecting, note that there are two 
red phono (RCA) connectors on the cable. 
One is for the right audio signal and the 
other for the V/Pr element of the compo-
nent video signal. If these two connectors 
are inserted incorrectly, the projected 
image appears green and the audio signal 
for the right speaker will not work.

3 Select Menu > Source and switch to Component.

Some video devices (e.g.: pocket multimedia players, ...) 
require specific connection cables. There are either 
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the 
original cables from the device manufacturer may func-
tion.

VGA

Y-Pb-Pr

HDMI

See the multimedia device instruction manual 
to find out how to switch the signal output to 
this jack.