NAD C 516BEE C516BEETI Leaflet

NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of 

NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form  

whatsoever without the written permission of NAD Electronics International. © 11/12 12-048 NAD Electronics International.

*  Gross dimensions include feet, extended buttons and rear panel terminals.

** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers, 

  cabinet makers, or other end users based on information contained in this document.

Note: Installers should allow a minimum clearance of 55mm for wire/cable management.

GENERAL PARAMETERS

Output Level

2.2 ±0.1 V (ANALOGUE)

Frequency Response

±0.5 dB (ref. 0 dB 20Hz-20kHz)

Total Harmonic Distortion 

                                                       

≤ 0.01% (ref. 20Hz-20kHz, LPF 20kHz)

Signal/Noise Ratio

≥ 118 dB (ref. 1kHz, A-weighted LPF 20kHz Stop, Pause)

Channel Balance

0.5 dB (ref. 0dB 1kHz)

Channel Separation

≥ 90 dB

POWER CONSUMPTION

 Standby Power

                                                                          

≤ 0.5 W

 Idle Power

≤ 8.0 W

DIMENSION AND WEIGHT

Unit Dimensions (W x H X D) 

435 x 70 x 249 mm (Gross)*  
17 1/8 x 2 3/4 x 9 13/16 inches

Net Weight

3.5 kg (7.7 lbs)

Shipping Weight

4.5 kg (9.9 lbs)

C 516BEE 230V

C 516BEE 120V

Total Width 435mm

Total Depth 249mm

Total Height

70mm