Philips Ultra-Slim Smart Full HD LED TV 47PFK7509 47PFK7509/12 User Manual

• this TV connected to your home network 

You can do the complete Ambilight+hue setup on TV and don’t
need the Ambilight+hue App.
If you do download the free 

Ambilight+hue App on your

smartphone or tablet later, you can use this App to adjust some
Ambilight+hue settings.

Configure

Configuration steps

To configure 

Philips hue bulbs as Ambilight+hue bulbs, follow

the steps on the following pages…

1 - Network
2 - Hue bridge
3 - Hue bulbs
4 - Configure bulb

Network

In this first step, you will prepare the TV to find the 

Philips hue

bridge.

The TV and the Philips hue bridge must use the same network.
Connect the Philips hue bridge to the router — the router of
the network the TV is using.
Switch on the hue bulbs.

To start the configuration…

1 - Press 

 (Ambilight) and switch Ambilight On.

2 - Press 

 and select Setup and press OK.

3 - Select 

TV settings > Ambilight > Ambilight+hue and press 

OK.
4 - Select 

Ambilight+hue one step further, select On and press 

OK.
5 - Select 

Configure Ambilight+hue and press OK.

If the TV is connected to your home network, it will start
looking for the Philips hue bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.  

With the TV connected to your network, go to page 

Hue

bridge.

For more info on connecting the TV to your home network,
press 



 Keywords and look up Network, wireless.

Hue bridge

In the following step, you will link up the TV with the 

Philips hue

bridge.
The TV can only be linked up to one hue bridge. 

To link the hue bridge…

1 - With the TV connected to the network, it will show the

available hue bridges. If the TV did not find your hue bridge yet,
you can select 

Scan again and press OK.

If the TV found the only hue bridge you have, select 

Next and

press 

OK.

If you have more than one hue bridge available, press 

 (up) or 

 (down) to select the hue bridge you want to use and then
select 

Next and press OK.

2 - After you pressed 

OK, go to the Philips hue bridge and

press the link button in the middle of the device. This will link
the hue bridge with the TV. Do this within 30 seconds. The TV
will confirm if a hue bridge is linked to the TV.
3 - On this confirmation, select 

OK and press OK.  

With the Philips hue bridge linked to the TV, go to page 

Hue

bulbs.

Hue bulbs

In the following step, you will select the 

Philips hue bulbs that

have to follow the Ambilight.
You can select a maximum of 9 Philips hue bulbs for
Ambilight+hue. 

To select the bulbs for Ambilight+hue…

1 - In the 

Configure Ambilight+hue menu, select Hue bulbs and

press 

OK.

2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press 

OK.

3 - When you’re done, select the 

OK button and press OK. 

With the bulbs marked for Ambilight+hue, go to page 
Configure bulb.

Configure bulb

In the following step, you will configure each 

Philips hue bulb.

To configure each hue bulb…

1 - Select the bulb name in the 

Configure Ambilight+hue menu

and press 

OK. The bulb you selected is blinking.

2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the 

Angle will send the correct Ambilight

colour to the bulb. Press 

 (up) or  (down) to adjust.

3 - Press 

 (right) to set the distance.

4 - Secondly, indicate the 

Distance between the bulb and the

TV. The further away from the TV, the weaker the Ambilight
colour. Press 

 (up) or  (down) to adjust.

5 - Press 

 (right) to set the brightness.

6 - Finally, set the 

Brightness of the bulb. Press 

 (up) or 

 (down) to adjust.
7 - To stop configuring this bulb, select 

OK and press OK.

8 - In the 

Configure Ambilight+hue menu, you can select every

bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select 

Finish

and press 

OK. 

Ambilight+hue is ready for use.

87