Fujitsu S26361-F3628-E201 Data Sheet
Data Sheet
LSI SAS9200-8e 6Gb/s 8ext PCIe FH/LP SAS Controller
Page 1 / 3
www.fujitsu.com/fts
Data Sheet
LSI SAS9200-8e 6Gb/s 8ext PCIe FH/LP SAS
Controller
LSI SAS-9200-8e 8-port, 6Gb/s SAS+SATA PCIe Host Bus Adapter
Main Features
Benefits
6Gb/s data transfer rate per port
6Gb/s SAS connectivity eases integration and broadens application
by supporting legacy speeds and the SATA protocol
by supporting legacy speeds and the SATA protocol
Two x4 external SFF8088 Mini-SAS connectors
Doubles the performance of previous generation SATA+SAS HBAs
LSI SAS2008 IO Controller’s Fusion-MPT™ 2.0 architecture can
achieve more than 320,000 I/Os per second
achieve more than 320,000 I/Os per second
Environmentally friendly due to low-power consumption
MD2 low profile form-factor design
MD2 form factor ideal for 1U and 2U server
Supports major operating systems
Mac OS support for additional integration flexibility
The SAS / SATA technology offers a performance
improvement over traditional SCSI connections.
Serial Attached SCSI (SAS) and Serial ATA (SATA)
are point-to-point serial peripheral interfaces
in which controllers are linked directly to disk
drives. This technology supports full-duplex signal
transmission up to 6Gb/s.
SAS devices can communicate with both SAS
and SATA devices. A key difference between
SAS and SATA devices is, that SAS devices can
have two data ports, of which each resides in
a different SAS domain. This enables complete
failover redundancy. If one path fails, there is still
communication along a separate and independent
path.
improvement over traditional SCSI connections.
Serial Attached SCSI (SAS) and Serial ATA (SATA)
are point-to-point serial peripheral interfaces
in which controllers are linked directly to disk
drives. This technology supports full-duplex signal
transmission up to 6Gb/s.
SAS devices can communicate with both SAS
and SATA devices. A key difference between
SAS and SATA devices is, that SAS devices can
have two data ports, of which each resides in
a different SAS domain. This enables complete
failover redundancy. If one path fails, there is still
communication along a separate and independent
path.
SAS9200-8e 6Gb/s 8ext PCIe FH/LP
The LSI SAS9200-8e, dual port, host bus adapter
provides high performance connectivity for
external JBOD and external RAID enclosures.
The LSISAS9200-8e provides 8 lanes of 6Gb/s
SAS connectivity to 8 lanes of PCI Express 2.0
5Gb/s performance to eliminate bottlenecks.
Performance is based on the LSISAS2008 IO
controller that highly integrates the latest
enhancements in PCI Express and SAS technology.
The HBA supports up to 512 SAS 2.0 compliant
devices.
provides high performance connectivity for
external JBOD and external RAID enclosures.
The LSISAS9200-8e provides 8 lanes of 6Gb/s
SAS connectivity to 8 lanes of PCI Express 2.0
5Gb/s performance to eliminate bottlenecks.
Performance is based on the LSISAS2008 IO
controller that highly integrates the latest
enhancements in PCI Express and SAS technology.
The HBA supports up to 512 SAS 2.0 compliant
devices.
The LSI SAS9200-8e has two (x4) external mini-
SAS connectors (SFF8088) enabling a low profile
solution that can achieve over 320,000 IOPs.
Automatic speed negotiation for SAS and SATA
data transfer rates of 1.5, 3 and 6Gb/s per lane
assures legacy compatibility while new systems
can benefit from T-10 Protection Information
Model for early detection of and recovery from data
corruption, and Spread Spectrum Clocking (SSC) for
minimal EMI.
solution that can achieve over 320,000 IOPs.
Automatic speed negotiation for SAS and SATA
data transfer rates of 1.5, 3 and 6Gb/s per lane
assures legacy compatibility while new systems
can benefit from T-10 Protection Information
Model for early detection of and recovery from data
corruption, and Spread Spectrum Clocking (SSC) for
minimal EMI.