Clarion CZ703E User Manual

English

14

CZ703E

1.   Press  the  [ 

  ]  button  to  move  to  the 

beginning of the previous track.

2.   Each time the [ 

 ] button is pressed, 

playback proceeds to previous track in the 

reverse direction.

Playing order will depend on Bluetooth

 

audio 

player. When [ 

 ] button is pressed, some 

A2DP devices will restart the current track 

depends on the duration of playback.

During  music  streaming  playback,  “

and HFP

” will be shown on the display. When 

A2DP device is disconnected, 

“

” will be shown 

on  the  display  and  return  to  previously 

selected  audio  source.  Some  Bluetooth

 

audio  players  may  not  have  play  /  pause 

synchronized with this unit. Please make sure 

both device and main unit are in the same 

play / pause status in 

 mode.

During music streaming playback, for music 

information  that  is  longer  than  the  display 

panel:

When SCROLL is ON, the LCD will display 

ID3  TAG  information  cyclely,  e.g:  ALBUM-

>TITLE->ARTIST>...

When SCROLL is OFF, the LCD will display 

one of the ID3 TAG information, the default 

is TRACK, but user can adjust it to other ID3 

TAG information by press 

 button.

Press 

 button on the panel to select 

“

”.

AUX is just for audio content with 3.5mm Jack 

connector plugged into audio-in socket on the 

front panel.

1.  Press and hold the 

 button (1 sec.).

2.   Turn the

knob to select “

”.

3.   If  the  output  level  of  connected  external 

audio player is “

”, rotate 

[VOLUME] 

knob and choose “

”. And if the output 

level is “

”, choose “

”.

Unit can not 

power on.

Unit fuse blown.

Replace with new fuse of correct rating.

Car battery fuse blown.

Replace with new fuse of correct rating.

Unit can not 

power on.

Nothing happens 

when buttons are 

pressed.

Display is not 

accurate.

The microprocessor has 

malfunctioned due to noise, etc.

Turn off the power and remove the DCP.

Press the [RESET] button with a thin rod.

Note:

When the [RESET] button is pressed, turn off

the ACC power.*
* When the [RESET] button is pressed, 

preset radio stations, titles, etc. stored in 

memory are kept.

No/low audio 

output.

Improper audio output connection. Check wiring and correct.

Volume set too low.

Increase volume level.

Speakers damaged.

Replace speakers.

Heavily biased volume balance.

Adjust the channel balance to center position.

Speaker wiring is in contact with 

metal part of car.

Insulate all speaker wiring connections.

Poor sound quality 

or distortion.

Non-standard disc used.

Use a standard disc.

Speaker power rating does not 

match unit.

Replace speakers.

Wrong connections.

Check wiring and correct.

Speaker is shorted.

Check wiring and correct.

Tel-Mute 

malfunction

MUTE wire is grounded.

Check the MUTE wiring and correct.

Unit resets itself 

when engine is off.

Incorrect connection between ACC 

and Battery.

Check wiring and correct.

Disc cannot be 

loaded.

Another disc is already loaded.

Eject the disc before loading the new one.

There is an object installed inside the 

unit.

Remove the object inside the unit.

Sound skips or is 
noisy.

Compact disc is dirty.

Clean the compact disc with a soft cloth.

Compact disc is heavily scratched or 

warped.

Replace with a compact disc with no 

scratches.

Sound is bad when 

power is first turned 

on.

Condensation may form on the internal 

lens when the car is parked in a humid 

place.

Let dry for about 1 hour with power on.