LG 22V241-B Leaflet
a
product type and category
Integrated Desktop Computer
category B
category B
b
manufacturer’s name,
registered trade name,
address
registered trade name,
address
LG Electronics Inc
LG
222 LG-ro Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 451-713, Korea
LG
222 LG-ro Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 451-713, Korea
c
product model number
22CV241
d
year of manufacture
2014
e
E TEC value (kWh)_dGfx (off)
27.5 kWh
f
E TEC value (kWh)_dGfx (on)
N/A
g
idle state power demand (Watts)
7.0 W
h
sleep mode power demand (Watts)
2.2 W
i
sleep mode with WOL enabled power demand (Watts) (where enabled)
2.2 W
j
off mode power demand (Watts)
0.4 W
k
off mode with WOL enabled power demand (Watts) (where enabled)
N/A
l
internal power supply efficiency at 10 %, 20 %, 50 % and 100 % of rated output power N/A
m
external power supply efficiency
(in case of < 250 W)
(in case of < 250 W)
87%
n
noise levels
(the declared A-weighted sound power level) of the computer
(the declared A-weighted sound power level) of the computer
45.6 dB(A)
o
the minimum number of loading cycles that the batteries can withstand
(applies only to notebook computers)
(applies only to notebook computers)
N/A
p
the measurement methodology used to determine information mentioned in points (e)
to (o)
to (o)
Average reading method
q
sequence of steps for achieving a stable condition with respect to power demand
1.Off mode:
Press power button or by manual selection.
2.Sleep mode:
Entering automatically after a period of inactivity or by manual selection
3.Idle mode:
15 min after OS boot or after completing an active workload or after resuming
from sleep
Press power button or by manual selection.
2.Sleep mode:
Entering automatically after a period of inactivity or by manual selection
3.Idle mode:
15 min after OS boot or after completing an active workload or after resuming
from sleep
r
description of how sleep and/or off mode was selected or programmed
Refer to the manual
s
sequence of events required to reach the mode where the equipment automatically
changes to sleep and/or off mode
changes to sleep and/or off mode
Entering automatically after a period of inactivity or by manual selection
(Refer to the manual)
(Refer to the manual)
t
the duration of idle state condition
21 minutes
u
the length of time_sleep mode
30 minutes
v
the length of time_display sleep mode
9 minutes
w
user information on the energy-saving potential of power management functionality
Refer to the manual
x
user information on how to enable the power management functionality
Refer to the manual
for products with an integrated display containing mercury the total content of
Web information _ 22CV241
y
for products with an integrated display containing mercury, the total content of
mercury as X,X mg
mercury as X,X mg
0 mg
z
test parameters for measurements
－test voltage in V and frequency in Hz
－total harmonic distortion
－information and documentation on the instrumentation, set-up and circuits used for
electrical testing.
－test voltage in V and frequency in Hz
－total harmonic distortion
－information and documentation on the instrumentation, set-up and circuits used for
electrical testing.
Ambient temperature (°C) : 26.2 ℃
Test voltage (V) and frequency (Hz) : 230 V, 50 Hz
Total harmonic distortion (THD) : 0.03 %
Test voltage (V) and frequency (Hz) : 230 V, 50 Hz
Total harmonic distortion (THD) : 0.03 %