Intel Edison Breakout Board BB2.AL.B Leaflet

Product Brief

Intel® Edison

The Intel® Edison development 

platform is designed to lower the 

barriers to entry for a range of 

inventors, entrepreneurs, and 

consumer product designers to 

rapidly prototype and produce 

“Internet of Things” (IoT) and 

wearable computing products. 

Supports Arduino Sketch, Linux, 

Wi-Fi, and Bluetooth. 
Board I/O: Compatible with 

Arduino Uno (except 4 PWM 

instead of 6 PWM):

• 20 digital input/output pins, 

including 4 pins as PWM 

outputs. 

• 6 analog inputs. 
• 1  UART  (Rx/Tx). 
• 1  I

2

C. 

• 1 ICSP 6-pin header (SPI). 
• Micro USB device connector OR 

(via mechanical switch) 

dedicated standard size USB 

host Type-A connector. 

• Micro USB device (connected to 

UART). 

• SD card connector. 
• DC  power  jack  (7  to15 VDC 

input). 

Slightly larger than the 

Intel® Edison module, the 

Intel® Edison Breakout Board has 

a minimal set of features: 

• Exposes native 1.8 V I/O of the 

Edison module. 

• 0.1 inch grid I/O array of 

through-hole solder points. 

• USB OTG with USB Micro 

Type-AB connector. 

• USB  OTG  power  switch. 
• Battery charger. 
• USB to device UART bridge with 

USB micro Type-B connector. 

• DC power supply jack (7 to 

15 VDC input). 

• Provides seamless Device-to-

Device and Device-to-Cloud 

communication. 

• Ability to run rules on your data 

stream that trigger alerts based 

on advanced analytics. 

• Foundational tools for 

collecting, storing, and 

processing data in the cloud. 

• Free for limited and 

noncommercial use. 

             

Intel® Edison 

Development Platform