Philips PPX3614 PPX3614/EU User Manual

Use a soft, lint-free cloth. Never use liquid or 
easily flammable cleansers (sprays, abrasives, 
polishes, alcohol, etc.). Do not allow any 
moisture to reach the interior of the device. 
Do not spray the device with any cleaning flu-
ids.

Wipe over the surfaces gently. Be careful that 
you do not scratch the surfaces.

Use a brush or lens cleaning paper for cleaning the lens 
of the projector.

Do not use any liquid cleaning agents for 
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

A overheat symbol appears if the device is overheated 
(see also Symbols in the Statusbar, page 10). The device 
behaves as follows:

1 The fan turns to maximum level.

2 At maximum level of brightness the symbol appears 

in the status bar and the device turns automatically 
to minimum level of brightness.

3 At minimal level of brightness the symbol shows for 

three seconds in the middle of the screen. Then the 
device turns off automatically.

After the device has cooled down, you can continue 
playback.

Connect for the duration of the firmware 
update the power adapter (see also Connect 
Power Supply / Charge Battery, page 11).

1 Format the memory card in the file system FAT16 or 

FAT32.

This procedure erases all your data that is 
stored on the memory card.

2 Save the latest firmware update file to the memory 

card.

3 Insert the memory card (see also Inserting a Memory 

Card, page 18) and switch the device on.

4 Use the navigation keys to select Settings. 

5 Confirm with 

à.

6 Use 

/ to select Maintenance.

7 Confirm with 

à.

8 Use 

/ to select Firmware Update.

9 Confirm with 

à.

10 Use 

/ to select Install.

11 Confirm with 

à.

12 The device turns off and on again. After around 5 

minutesthe  Language Selection screen appears. 
The firmware update is now completed.

Never pull out the memory card while the 
device is accessing it. This could cause data 
to be damaged or lost.

Do nut unplug the power adapter during 
the firmware update.

If an error occurs during the firmware update 
process retry the procedure or contact your 
dealer.