Fujitsu RX2540 M1 VFY:R2541SC030IN Data Sheet

Data Sheet

 FUJITSU Server PRIMERGY RX2540 M1 Dual socket 2U rack server 

Page 4 / 11

www.fujitsu.com/fts

Memory protection

Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support

Memory notes

Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or 
Performance Mode with identical modules in all four channels (4 modules per bank).

Memory options

8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 1Rx4
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx8
16 GB (1 module(s) 16 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133P, LRDIMM, 4Rx4

Memory modules notes

1536 GB memory expected to be available Q1/2015, current max. memory capacity 768 GB

Interfaces

USB 2.0 ports

5 x USB 2.0 (2x rear, 1x front external, 1x USB stick, 1x uSSD)

USB 3.0 ports

5 x USB 3.0 (2x front, 2x rear, 1x internal for backup device)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C optional,  usable for iRMC or system or shared

Management LAN (RJ45)

1 x dedicated management LAN port for iRMC S4  (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard LAN port

Onboard or integrated Controller

RAID controller

additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C612, 1 x SATA channel for ODD

LAN Controller

DynamicLoM based on Emulex XE100 series. All supported features are described in relevant system configurator.
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot (also diskless).

Remote management controller

Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x8

3 x Low profile (2nd processor required for slot 4)

PCI-Express 3.0 x16

3 x Low profile (2nd processor required for slot 5 and 6)

Slot Notes

First PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured.
Important: 3 PCIe slots are supported with the first processor. 6 PCIe slots are supported with two processors.
PCIe riser card options can expand number of slots by two (max. 8 in total) and support max. 4 full height slots.
Possible slot length described in relevant system configurator. 

Drive bays

Storage drive bays

3.5-inch or 2.5-inch (rear option avail. 02/2015) hot-plug SAS/SATA

Accessible drive bays

1 x 5.25/0.4-inch for CD-RW/DVD

Notes accessible drives

All possible options described in relevant system configurator.

Optional hard disk bays

4x 2.5-inch hot-plug SAS/SATA rear option

Drive bays (Base unit specific)

Storage drive bays

8 x 3.5-inch hot-plug SAS/SATA

12 x 3.5-inch hot-plug SAS/SATA

Accessible drive bays

1 x 5.25/0.4-inch for CD-RW/DVD

Optional accessible drives

ODD 5.25” possible

ODD 5.25” not possible

General system information

Number of fans

5

Fan configuration

redundant / hot-plug

Fan notes

4+1 redundant

Operating panel

Operating buttons

On/off switch
Reset button
NMI button
ID button