SmartMetals 062.7700 Leaflet
Tip & Touch stand wheelchair users
PRODUCT LEAFLET
062.7700 Tip & Touch stand for wheelchair users (H= 844- 1504mm)
SmartMetals has developed a range floor solutions for Touch displays which would be used in the table position; we call it
the Tip & Touch stand. This specific version has been adjusted for wheel chair users; with a wider foot print, bigger castors
and an option for a PC at the side. This wheeled stand has an electrical height adjustment from 844 - 1504mm (table
height); which can be limited for a 55 inch to 920-1160 mm. The Tip & Touch stand is available with a motorized tip function
of 90 degrees; which can be limited from 0 to 25 degrees. A bracket is integrated with VESA patterns 400 - 200, 400 - 400
and 600 - 400.Please note: Check if your display is suitable for horizontal use. SOON AVAILABLE: approximately 4 weeks
after order
the Tip & Touch stand. This specific version has been adjusted for wheel chair users; with a wider foot print, bigger castors
and an option for a PC at the side. This wheeled stand has an electrical height adjustment from 844 - 1504mm (table
height); which can be limited for a 55 inch to 920-1160 mm. The Tip & Touch stand is available with a motorized tip function
of 90 degrees; which can be limited from 0 to 25 degrees. A bracket is integrated with VESA patterns 400 - 200, 400 - 400
and 600 - 400.Please note: Check if your display is suitable for horizontal use. SOON AVAILABLE: approximately 4 weeks
after order
SmartMetals Mounting Solutions B.V. • Handelsweg 4 • 4231 EZ Meerkerk • The Netherlands • T +31(0) 183352942 • F +31(0) 183352909 • info@SmartMetals.eu
Tip & Touch stand wheelchair users
PRODUCT LEAFLET
062.7700 Tip & Touch stand for wheelchair users (H= 844- 1504mm)
SmartMetals has developed a range floor solutions for Touch displays which would be used in the table position; we call it
the Tip & Touch stand. This specific version has been adjusted for wheel chair users; with a wider foot print, bigger castors
and an option for a PC at the side. This wheeled stand has an electrical height adjustment from 844 - 1504mm (table
height); which can be limited for a 55 inch to 920-1160 mm. The Tip & Touch stand is available with a motorized tip function
of 90 degrees; which can be limited from 0 to 25 degrees. A bracket is integrated with VESA patterns 400 - 200, 400 - 400
and 600 - 400.Please note: Check if your display is suitable for horizontal use. SOON AVAILABLE: approximately 4 weeks
after order
the Tip & Touch stand. This specific version has been adjusted for wheel chair users; with a wider foot print, bigger castors
and an option for a PC at the side. This wheeled stand has an electrical height adjustment from 844 - 1504mm (table
height); which can be limited for a 55 inch to 920-1160 mm. The Tip & Touch stand is available with a motorized tip function
of 90 degrees; which can be limited from 0 to 25 degrees. A bracket is integrated with VESA patterns 400 - 200, 400 - 400
and 600 - 400.Please note: Check if your display is suitable for horizontal use. SOON AVAILABLE: approximately 4 weeks
after order
SmartMetals Mounting Solutions B.V. • Handelsweg 4 • 4231 EZ Meerkerk • The Netherlands • T +31(0) 183352942 • F +31(0) 183352909 • info@SmartMetals.eu