Fujitsu RX100 S8 VFY:R1008SC010IN/R2 Data Sheet

Data Sheet

 FUJITSU Server PRIMERGY RX100 S8 Mono socket 1U rack server 

Page 4 / 9

www.fujitsu.com/fts

Onboard or integrated Controller

SATA Controller

Intel® C226, 1 port used for accessible drive 
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux; 

LAN Controller

Intel® i210 onboard, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), iSCSI, PXE-Boot and WoL are supported 

Remote management controller

Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible

Trusted Platform Module (TPM)

optional TPM

Onboard or integrated Controller (Base unit specific)

RAID controller

4 port SATA with RAID 0/1/10 for HDDs

4 port SATA with RAID 0/1/10 for HDDs

SATA Controller

4-port SATA 6Gb with RAID 0, 1, 10

4-port SATA 3GB with RAID 0, 1, 10

SATA controller type notes

for hot-plug SATA hard disks

for hot-plug SATA hard disks

Slots

PCI-Express 3.0 x8

2 x Low profile Length 175mm; PCIe slot#1 = dedicated Modular RAID slot

PCI-Express 2.0 x4 (mech. x8)

1 x Low profile 

Slot Notes

Optional support of 1x full height PCIe Gen3 x8 card, instead of 1x PCIe Gen2 x4 and 1x PCIe Gen3 x8

Drive bays

Storage drive bays

4/8 x 2.5-inch hot-plug SAS/SATA or 4x 3.5-inch hot-plug SAS/SATA or 10 x 2.5-inch hot-plug SAS/SATA as soon as 
released

Accessible drive bays

1 x 5.25/0.4-inch for CD-RW/DVD

Notes accessible drives

Following limitations applies to 10x 2.5-inch HDD base unit: No CD-RW/DVD, 1x USB 2.0 at the front, no front VGA

Drive bays (Base unit specific)

Storage drive bays

Max. 4x 3.5-inch

Max. 8x 2.5-inch

Max. 10x 2.5-inch

Number of fans

4

Fan notes

4 fans in combination with standard power supply or 5 fans in combination with hot-plug PSU base unit for 1+4 
redundancy. 

Number of fans

4

5

4

5

Fan configuration

4 standard fan

5 redundant fan

4 standard fan

5 redundant fan

Fan notes

non redundant / non hot-
plug

redundant / non hot-plug

non redundant / non hot-
plug

redundant / non hot-plug

Operating panel

Operating buttons

On/off switch
NMI button
Reset button

Status LEDs

System status (orange)
Identification (blue)
Hard disks access (green)
Power (green)
At system rear side:
System status (orange)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)

BIOS

BIOS features

ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
Remote PXE boot support
Remote iSCSI boot support