Fujitsu TX1320 M1 VFY:T1321SXG10IN/R4 Data Sheet

Product codes
VFY:T1321SXG10IN/R4
Page of 8
Data Sheet
 Fujitsu Server PRIMERGY TX1320 M1 Tower Server 
Page 3 / 8
www.fujitsu.com/fts
Technical details
PRIMERGY TX1320 M1
Base unit
PRIMERGY TX1320 M1 SFF
PRIMERGY TX1320 M1 LFF
Housing types
Ultra-compact form-factor
Ultra-compact form-factor
Storage drive architecture
2.5-inch
2x 3.5-inch SATA (non hot-plug)
Mainboard
Mainboard type
D3239
Chipset
Intel® C224
Processor quantity and type
1 x Intel® Pentium® processor / Intel® Core™ i3 processor / Intel® Xeon® processor E3-1200v3 product family
Processor
Intel® Celeron® processor G1820 (2C/2T, 2.70 GHz, TLC: 2 MB, Turbo: No, Mem bus: 1,333 MHz, 54 W)
Intel® Core™ i3-4330 processor (2C/4T, 3.50 GHz, TLC: 4 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Pentium® processor G3420 (2C/2T, 3.20 GHz, TLC: 3 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Xeon® processor E3-1220v3 (4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1231v3 (4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.60 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1240Lv3 (4C/8T, 2.00 GHz, TLC: 8 MB, Turbo: 2.80 GHz, Mem bus: 1,600 MHz, 25 W)
Intel® Xeon® processor E3-1241v3 (4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.70 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1271v3 (4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: 3.80 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1275Lv3 (4C/8T, 2.70 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 45 W)
Intel® Xeon® processor E3-1281v3 (4C/8T, 3.70 GHz, TLC: 8 MB, Turbo: 3.90 GHz, Mem bus: 1,600 MHz, 82 W)
Memory slots
Memory slot type
DIMM (DDR3) UDIMM
Memory capacity (min. - max.)
4 GB - 32 GB
Memory protection
ECC
Memory notes
Mix and match possible; with dual channel operation better performance (2 modules with equal capacity necessary). 
Single channel (1 module) configuration possible.
Memory options
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
Memory modules notes
1333MHz or 1600 MHz memory modules
Interfaces
USB 2.0 ports
7 (4x external  rear, 2x external front, 1x internal for UFM, no USB wakeup supported)
USB 3.0 ports
3 (2x external  rear, 1x internal)
Graphics (15-pin)
1 analog graphics interface derived from iRMC (up to 1600x1200 or 1920x1080 at 16bpp)
Serial 1 (9-pin)
LAN / Ethernet
2 x1 Gb/s Ethernet; RJ45
Management LAN (RJ45)
1 x dedicated management LAN port for iRMC S4  (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller
Optionally integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C224, 2 ports used for accessible drives 
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
SATA controller type notes
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux
LAN Controller
Intel® i217 + Intel® i210 onboard, 2 x 10/100/1000 Mbit/s Ethernet, Intel® i217LM: 2xTX/2xRX, iSCSI remote boot 
support, APM wake up.
Intel® i210, 4xTX/4xRX, iSCSI and PXE 2.0-remote Boot via LAN, WoL.
Service LAN: Realtek RTL8211E
Remote management controller
Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / 1.2 (option)