Fujitsu RX350 S8 VFY:R3508SC010IN/R1 Data Sheet

Data Sheet

 FUJITSU Server PRIMERGY RX350 S8 Dual Socket 4U rack server 

Page 4 / 9

www.fujitsu.com/fts

Interfaces

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC or system or shared

LAN / Ethernet

2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s (SFP+)

Management LAN (RJ45)

1 x dedicated management LAN port for iRMC S4  (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port 
or optional Modular LAN 2x10 Gbit controller
Front Service LAN port as option

Onboard or integrated Controller

RAID controller

4 port for internal 3G SATA and SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10 or SAS LTO 
device  (Intel C600)
additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C600, 2 x SATA channel for ODD

LAN Controller

Intel® Ethernet Controller I350. 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration). Modular integrated on-board LAN  
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless) 

Remote management controller

Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible

GPU / coprocessor

1-2 NVIDIA® Tesla™ K20 and K20X GPGPU
1-2 Intel® Xeon® Phi 3120P / 5110P / 7120P coprocessor

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x4 (mech. x8)

2 x Full height (2nd processor required)

PCI-Express 3.0 x8

4 x Full height (here of 1 is reserved for Modular RAID controller)

PCI-Express 3.0 x8 (mech. x16)

1 x Full height 

PCI-Express 3.0 x16

2 x Full height (2nd processor required)

PCI-Express 2.0 x4 (mech. x8)

1 x Full height (2nd processor required)

Slot Notes

One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.
Possible slot length described in relevant system onfigurator. 

Drive bays

Storage drive bays

2.5-inch or 3.5-inch hot-plug SAS/SATA

Accessible drive bays

1 x 5.25/0.5-inch for ODD
1 x 5.25/1.6-inch for ODD or backup devices 
1 x 5.25/0.5-inch for Local Service Display 

Notes accessible drives

All possible options described in relevant system configurator.

Drive bays

Storage drive bays

Max 12 (4 + 4 + 4) x 3.5-inch

Max 24 (8 + 8 + 8) x 2.5-inch

Optional accessible drives

3x 5.25/1.6-inch bay for accessible devices (HDD: 4x 3.5-
inch hot-plug SAS/SATA or LTO drive)

3x 5.25/1.6-inch bay for accessible devices (HDD: 8x 2.5-
inch hot-plug SAS/SATA and LTO drive)

General system information

Number of fans

4

Fan configuration

4x single hot plug fans Ø90mm plus optional 2x single hot plug fans Ø90mm for redundancy

Operating panel

Operating buttons

On/off switch
Reset button
NMI button
ID button