Kanex HDBASE70POE Leaflet

Page of 1
ABOUT KANEXPRO
KanexPro carries a broad selection of A/V connectivity products by leveraging the core strength in professional systems enabling you to broadcast, convert, extend, split, or 
multiply HD signal transmissions; simply and cost-effectively. KanexPro is a trademark. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other product or service names are the property of their respective owners.
kanexpro.com
1405 Pioneer St., Brea, CA 92821
888.975.1368  info@kanexpro.com
MPN: HDBASE70POE
FEATURES
• Two-way remote power: Tx to Rx or Rx to Tx 
using PoE (Power over Ethernet)
• Route uncompressed HDMI signals over Single 
CAT6a
• Extend up to 200 feet • Supports HDMI 1.4, 4K, 
3D, and full HD 1080p/60
• HDCP & EDID compliant
• CEC Pass-through
• Bi-directional IR & RS-232 for control
• Supports all frequencies IR pass through, 5V 
& 12V, Crestron and Xantech IR control signal 
SPECIFICATIONS
• Input Signal: 1xHDMI, 1xIR,1xRS-232  (on each unit)
• Input Connector: 1 x HDMI, 1 x 3.5 mm mini-jack, 1 x 
RJ-45 (each unit)
• Video Signal: HDMI1.4
• Audio: Digital audio transmitted through HDMI audio 
• Output Signal: 1 RJ-45,1 IR 1 HDMI, 1 IR
• Output Connector: RJ-45,3.5mm mini-jack HDMI 
female,3.5mm mini-jack
• Video signal: HDMI1.4 
• Transmission Mode: HDBaseT® Lite Technology
The KanexPro HDBASE70POE is 
a Transmitter-Receiver set made 
to extend UltraHD 4K, digital 
audio, wide-band IR and power 
over Ethernet (PoE) over a cost 
effective cat6a cable. It also 
supports computer resolutions up 
to 1920x1200, HD1080P/60 with 
Deep Color. This HDCP compliant 
extender routes distances up to 
200 feet using HDBaseT™ Lite 
technology.
As an added benefit to the systems 
integrator - the extender provides 
remote power from either side 
Tx or Rx over the twisted pair 
connection, eliminating the need 
for a separate power supply at the 
remote unit. Ideal for use in digital 
signage applications, healthcare AV, 
control rooms, educational facilities, 
airports, commanding centers and 
home theater.
Note:
 Do not use couplers between 
the RJ-45/ CAT6 cables, this will 
cause degradation or damage to 
the unit. To reduce video dropout 
problems from lightings, ceiling fans 
and other EMI issues, it is strongly 
recommended that you terminate 
shielded CAT6 or CAT5e cables 
and use shielded RJ45 connectors 
with our extender products.es not 
support 4K at this time.
HDBaseT™ Lite 70M - HDMI® Extender
w/ Power over Ethernet
compatible 
• Front panel LED’s for signal & power
• Supports high bandwidth up to 10.2 Gbps
• Compatible with HDMMX modular matrix 
switchers
• Locking power supplies included
• Aluminum case enclosure with separate 
mounting ears
• Backed by KanexPro 3-Year Parts and Labor 
Warranty
Receiver
Transmitter
DVD
IR Sensor
HDMI
HDMI
Rs232 Control Signal
            Video Signal
            IR Transmitter/Receiver
            Audio/Video Signal
CAT5e
INPUT
OUTPUT
IR Receiver
IR Remote
Rs232
Control panel
Projector
IR Emitter
Whiteboard