Indesit IWSD 51251 C ECO EU User Manual

D

IS

H

W

A

S

H

E

R

S

48

49

www.indesit.com

The new Prime A+ models include two new automatic cycles which allow you to programme the perfect settings for

optimum washing. The sensor system detects actual dirt and monitors the level of cleanliness of the water: based on this

information, the number of washes, the jet pressure, the temperature and the duration of the programme are all adjusted

appropriately. Using our automatic programmes, you can benefit from water and energy savings of over 10%.

This programme brings together just the right combination of factors to eliminate the most stubborn dirt from your dishes

without wasting energy.

The automatic cycle which washes dishes with a normal level of dirt perfectly, optimising consumption of both energy

and water.

Present only on the models with  Synchronous motor, the Smart Sixty is perfect for those who want to clean 6/7 place

settings with the A class washing performance in only 60 minutes.

The direct use of hot water means you can enjoy energy savings of more than 60% compared to the cold water

Eco cycle. With a direct hot water connection, the dishwasher resistor is not required to heat the water to the

desired temperature.

With the new Prime A+ dishwashers, you can save up to 60% more energy by using stand by mode at the end of each

washing cycle. During stand by, all of the dishwasher’s safety systems remain active.

The Prime A+ range, designed by Giugiaro, has a modern and functional style which combines an attractive

appearance with attention to detail and easy programming. The new Prime A+ dishwashers are available with digital

display and blue LED lighting in models with BLDC motors or with dials in models with synchronous motors. Prime

A+ dishwashers are available in white and iridium.

The Indesit Prime dishwashers have obtained a A+ rating for energy efficiency in terms of performance

and reduced consumption. 

With the new A+ class the energy consumption of a standard cycle is equal to 1.03 KWh, with a 10%

reduction compared to the A class Ones (1.16 KWh). Moreover the new Indesit dishwashers obtained

an A rating for washing and drying efficiency.

The new soundproof panel allows a

further noise reduction of up to 46 dB(A)

during the wash.

Indesit’s new Prime A+ dishwashers have been cleverly designed to allow you to complete a normal

cycle using just 12 litres of water. The new motor and sensor system recognise the turbidity of the

water, allowing the optimisation of water consumption. With the new Prime A+ models, you can use

up to 15% less water*.

* compared to standard average dishwashers.

The internal space is fully utilized to

provide greater wash load capacity: the

new rack design accommodates up to 14

place settings.

The New Normal Speed+ and Intensive Speed+ programmes are designed to time saving

efficiency. 

The jet pressure regulator guarantees perfect rinsing performance and fast operation, yielding

30% in rinse savings compared to the Normal and Intensive cycles. 

The new Indesit Prime A+ dishwashers with prime Technology optimizes consumption while guaranteeing optimal wash results

in minimal time. All you have to do is select the normal or intensive program: a sensor detects the level of food particles in the

dishwasher, by measuring the level of water turbidity, and consequently sets the jet pressure, temperature and number of rinse

cycles in order to obtain impeccable wash results while consuming only the necessary quantity of energy and water.